HP 2727 frozen at start-up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nogood boyo
    Trusted Tech
    • Mar 2012
    • 156
    #1

    [Dead] HP 2727 frozen at start-up

    pretty much a brand new machine,

    wont load up passed the "Hewlett Packard" logo at the beginning.

    any ideas where to start? is it a PCB that i can order and replace?
    Tags: froze
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: HP 2727 frozen at start-up

      If it's an HP LJ M2727 MFP it's probably the formatter. Very common. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          Re: HP 2727 frozen at start-up

          This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


          Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


          Paul@justmanuals.com

            Comment

            • nogood boyo
              Trusted Tech
              • Mar 2012
              • 156
              #4
              Re: HP 2727 frozen at start-up

              thanks!

              should be a quick fix, looks like i could have consulted Google on this one first!

                Comment

                • MR Bill
                  Senior Tech

                  500+ Posts
                  • Jan 2010
                  • 532
                  #5
                  Re: HP 2727 frozen at start-up

                  Yes, formater. Try baking it in the oven first. 360 deagrees for 8 minutes will take care of you problem. You have a cracked solder joint and heating the board will melt the solder and flow . Fixing the problem. this will fix the problem 90% of the time.

                    Comment

                    • johnyb
                      Trusted Tech

                      100+ Posts
                      • Feb 2011
                      • 167
                      #6
                      Re: HP 2727 frozen at start-up

                      Originally posted by MR Bill
                      Yes, formater. Try baking it in the oven first. 360 deagrees for 8 minutes will take care of you problem. You have a cracked solder joint and heating the board will melt the solder and flow . Fixing the problem. this will fix the problem 90% of the time.
                      Add some sugar, 2 beaten eggs, and a pinch of salt !!!!

                      Just joking!!
                      Mr Bills fix does work!

                        Comment

                        Previous template Next
                        Working...