Good day i have a kyocera 6525 have an indication of F000. Thry say its firmware problem or the PWB. Can you give me another way to solve this problem thank you
Sent from my RNE-L22 using Tapatalk
Sent from my RNE-L22 using Tapatalk
-
-
Re: F000
No I didn't try it yet. For the problem they told me the firware problem. Is it possible that the firware is need to update?
Sent from my RNE-L22 using TapatalkComment
-
Re: F000
hello,i have one UTAX 256i whit a strange error
the machine work all correctly , scan,print, copy, read to usb ecc.ecc but in web page not have section for set ONE TOUCH , only address book
when i attempt to upgrade fw whit usb pen drive this not work, go to F000
usb pen drive ok(testedwhit another mfp)read to usb ok(check a document)
i have rea last bt utax but only suggest is for f245 whit reset fw but i have fear to block all
any idea?Comment
-
Re: F000
Printing web pages can be problematic for Kyoceras. When possible, select "View as PDF" or "Printer Friendly Page". In some webpages you'll have the option to "Download as PDF". You'll be able to print the downloaded PDF document.
The way I understand it, the links built into the webpage closely resemble PreScribe commands (the native language of Kyocera printers), confusing the printer. The PDF or Printer Friendly Page will have those links removed.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: F000
[QUOTE=blackcat4866;2080753]Comment
-
Re: F000
So your machine works? You just cannot update the firmware? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: F000
[QUOTE=blackcat4866;2080998]Quindi la tua macchina funziona? Non riesci ad aggiornare il firmware? =^..^=[/CITAZIONE]
yes
azzo:
Comment
-
Re: F000
i think this 3d are in bad forum section ,can you move to the right section?Comment
Comment