Kyocera Half Speed mode Prescribe Command

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DamianGr
    Junior Member
    • Mar 2021
    • 2
    #1

    Kyocera Half Speed mode Prescribe Command

    Hi,
    I have an unusual problem.
    I use a Kyocera fs-4200 dn printer for an old mailing device at work.
    The problem is that sometimes pages print too quickly one after another and a paper jam occurs at the mailing machine input.
    As far as I know the printers offer half speed mode. This can be set in the driver. The problem is that our printer works as an LPT printer under DOS without a driver.
    Is there a Prescribe command to set the Half Speed ​​function from DOS or the command line?
    Tags: command, half, printer, speed
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 7931
      #2
      Re: Kyocera Half Speed mode Prescribe Command

      Originally posted by DamianGr
      Hi,
      I have an unusual problem.
      I use a Kyocera fs-4200 dn printer for an old mailing device at work.
      The problem is that sometimes pages print too quickly one after another and a paper jam occurs at the mailing machine input.
      As far as I know the printers offer half speed mode. This can be set in the driver. The problem is that our printer works as an LPT printer under DOS without a driver.
      Is there a Prescribe command to set the Half Speed ​​function from DOS or the command line?

      How about setting the media to a heavier weight?
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • DamianGr
          Junior Member
          • Mar 2021
          • 2
          #3
          Re: Kyocera Half Speed mode Prescribe Command

          Originally posted by copier tech
          How about setting the media to a heavier weight?

          We used to do this - but it turned out that the drum was very quickly clogged with seized waste toner. Also Helix shaft breaks from toner discharge.
          We use Light and Normal preprinted paper only.

            Comment

            • dalewb74
              Service Manager

              Site Contributor
              1,000+ Posts
              • Feb 2018
              • 1064
              #4
              Re: Kyocera Half Speed mode Prescribe Command

              you are in luck. i have a fs2100 and a fs4200. i have the 2100 installed, but not the 4200. but since the print driver is the same. i saw this thread and was curious. looking under printing preferences i found the half speed mode. this is my one new thing learned for the day. as i had never even heard of this before. probably because i have never had a need, but still....

                Comment

                • dalewb74
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2018
                  • 1064
                  #5
                  Re: Kyocera Half Speed mode Prescribe Command

                  you are in luck. i have a fs2100 and a fs4200. i have the 2100 installed, but not the 4200. but since the print driver is the same. i saw this thread and was curious. looking under printing preferences i found the half speed mode. this is my one new thing learned for the day. as i had never even heard of this before. probably because i have never had a need, but still....
                  so i see you use it as LPT, but what if you hook it up USB and install the print driver?

                    Comment

                    Previous template Next
                    Working...