hello to all, i have lexmark e t650 and if i print page are dirty IMG_0946.jpg any ide ? thanks
-
-
Re: lexmark t650n print dirty
What have you done so far? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: lexmark t650n print dirty
Replace the cartridge. Looks like the developer roller is egg shaped. Is this a Lexmark cartridge of a remanufactured aftermarket?
LarhalLarhal
Retired Part Time
If all else fails read the Service Manual!
If that fails, meet me at the pub and we will discuss it.Comment
-
Re: lexmark t650n print dirty
I agree with Larhal, it is most likely a defective toner cartridge, with fuser unit coming in at a distant 2nd possibility.
I have seen you post it a few times if anyone has any (ide), you do know the word is (idea) right? just curi
Comment
-
Re: lexmark t650n print dirty
Good catch there copdocinc. repremand with gentleness is the idea. In other words "smarten up " as my boss would keep drilling when he passes by.
ide = The definition of IDE is "Integrated Development Environment" or "Integrated Device Electronics"
idea = a thought or suggestion as to a possible course of action.
Stop the print before it reaches the fuser or when you think it is just past the drum unit. remove the cartridge and check the quality. if bad, replace cartridge if not replace fuser.
THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burkeComment
-
Re: lexmark t650n print dirty
I do not know English good,
Thanks for the answersComment
Comment