Lexmark E260dn - All Lights BLinking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Orion2010
    Trusted Tech
    • Jun 2015
    • 176

    #1

    Lexmark E260dn - All Lights BLinking

    Hello to all,
    I have problem with lexmark e260, all lights blinking! I replace powe supply, formater board , fuser ,laser, but nothing !! Any ide ? Thanks
  • Luther
    Senior Tech

    500+ Posts
    • May 2006
    • 682

    #2
    Re: Lexmark E260dn - All Lights BLinking

    try this link: http://support.lexmark.com/index?pag...N_US&id=HO3026

    Comment

    • Orion2010
      Trusted Tech
      • Jun 2015
      • 176

      #3
      Re: Lexmark E260dn - All Lights BLinking

      Now i reset, and the printer start calibration with 3 light ready, toner , and paper , printer only printing diagnostic page and if turn off and on , again all light blinking??

      Comment

      • Lance15
        Service Manager

        Site Contributor
        1,000+ Posts
        • Jun 2015
        • 1083

        #4
        Re: Lexmark E260dn - All Lights BLinking

        All service errors are indicated by all lights flashing as the primary notification or code. The secondary code indicates an area or function which has the error.


        Double-click the Continue button to see the secondary light pattern.


        This printer wouldn't be the same as this, would it?: http://www.copytechnet.com/forums/le...red-power.html

        Comment

        Working...