Lexmark XM7263 service fan error

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lumumbahasan
    Junior Member
    • Feb 2020
    • 4
    #1

    [Error Code] Lexmark XM7263 service fan error

    I am working on a Lexmark XM7263 with a service fan error. The screen is blue with the service fan error I have turned the device off for 10 second and restarted and unplugged it and powered it back on still with the same error. I have changed out the control board and still getting the same error. I am looking for documentation on how to reset the device and I am not finding any. Thanks in advance for any assistance.
    Tags: device, error, fan, service, xm7263
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22698
      #2
      Re: Lexmark XM7263 service fan error

      Have you given any thought to investigating a non-functional fan? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • lumumbahasan
          Junior Member
          • Feb 2020
          • 4
          #3
          Re: Lexmark XM7263 service fan error

          I have checked to into the fan not working there is no voltage coming off the control board. I have replaced the control board and fan and I still get this error 17:00 kworker /1:1:272. I have turned it off and waited for 10 seconds then I got error 17:00 kworker /0:1:287 then I tried to reset the machine by holding the 2 and 6 button it still goes right into the blue screen with error 17:00 kworker 1:1:272. I have unplugged the fan from the control board to check for voltage I got no voltage coming from the pins.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22698
              #4
              Re: Lexmark XM7263 service fan error

              It was on a different model Lexmark, but I ended up replacing the fan and the operation panel PWB. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • lumumbahasan
                  Junior Member
                  • Feb 2020
                  • 4
                  #5
                  Re: Lexmark XM7263 service fan error

                  A quick update with my Lexmark 7263, the service fan was not working due to the low voltage board. I was not getting any power to the main board so I replaced the low voltage and it is now working client is very happy. Thanks to all that helped.

                    Comment

                    Previous template Next
                    Working...