If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It's brand new and i got it for free so that's why ,maybe i should sell parts like fuser,transfer belt etc...??
For the new one I saw on PrecisionRoller you will find everything except the drums ..., with the used one I would look for it on ebay, obviously the machine is new (without spacers or pins) but if it has not been used for a long time there could be problems with materials consumables such as cleaning blades, damage to foam seals, rubber rollers remaining in contact.
Comment