Lexmark C925DE Color Banding...unreal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tech07
    Trusted Tech

    250+ Posts
    • Aug 2008
    • 409

    #1

    [CQ] Lexmark C925DE Color Banding...unreal

    Ok gentlemen. Went to a Lexmark C925 DE printer today. Call was for copy quality. Boy was that true. See attached image. Has anyone seen this wierd color banding ??2013-05-03 16.09.28 lexmark.jpg
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: Lexmark C925DE Color Banding...unreal

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • Iowatech
      Not a service manager

      2,500+ Posts
      • Dec 2009
      • 3930

      #3
      Re: Lexmark C925DE Color Banding...unreal

      Kind of looks like an automatic line adjustment/color registration pattern. Is the transfer belt unit in good shape?

      Comment

      • tech07
        Trusted Tech

        250+ Posts
        • Aug 2008
        • 409

        #4
        Re: Lexmark C925DE Color Banding...unreal

        Took transfer belt out and examined. Did't see any issues ( doesn't mean there's not any). It cleans good. Can you turn line adjustment off/on.. How would you trouble shoot this. Lexmark is sending new image units, but I dont believe all three color units would go bad at once. The spacing on the bands is 75 mm..I dont see 3 print heads screwing up at the same time either.. This printer only has 24K prints..
        Attached Files

        Comment

        • Silvertoast
          Trusted Tech

          250+ Posts
          • Feb 2010
          • 270

          #5
          Re: Lexmark C925DE Color Banding...unreal

          i would try the simple first and update the firmware or reflash if it already has the newest. if still acts up u might have a sys card problem

          Comment

          • blackcat4866
            Master Of The Obvious

            Site Contributor
            10,000+ Posts
            • Jul 2007
            • 22997

            #6
            Re: Lexmark C925DE Color Banding...unreal

            It looks like transfer belt to me too. On other brands I've seen a torn or pierced belt snag on the transfer cleaning blade, creating the bar crossfeed for each color, and offsetting the color registration by 5 to 8mm each time. Just rotate through a couple full rotations of the belt. The damage is usually pretty catastrophic, and you'll feel it in the drive when the rough spot goes by. =^..^=
            If you'd like a serious answer to your request:
            1) demonstrate that you've read the manual
            2) demonstrate that you made some attempt to fix it.
            3) if you're going to ask about jams include the jam code.
            4) if you're going to ask about an error code include the error code.
            5) You are the person onsite. Only you can make observations.

            blackcat: Master Of The Obvious =^..^=

            Comment

            • tech07
              Trusted Tech

              250+ Posts
              • Aug 2008
              • 409

              #7
              Re: Lexmark C925DE Color Banding...unreal

              may have found a solution . http://support.lexmark.com:80/lexmar...le=EN&id=TE533

              Comment

              • tech07
                Trusted Tech

                250+ Posts
                • Aug 2008
                • 409

                #8
                Re: Lexmark C925DE Color Banding...unreal

                SOLVED...Exchanged all 3 color imaging units one at a time...Cyan unit fixed it

                Comment

                • Iowatech
                  Not a service manager

                  2,500+ Posts
                  • Dec 2009
                  • 3930

                  #9
                  Re: Lexmark C925DE Color Banding...unreal

                  I would have never thought that one damaged color drum could cause CYM copy defects. Thanks for the info!

                  Comment

                  • Lagonda
                    Service Manager

                    Site Contributor
                    1,000+ Posts
                    • Aug 2008
                    • 1649

                    #10
                    Re: Lexmark C925DE Color Banding...unreal

                    Good Morning Gentlemen,
                    Its not often I visit this corner of CTN but I have a X925 in the workshop thats giving me grief.
                    It started with the above problem and a new yellow drum unit solved the problem. Now I can't get the yellow into registration with the other colours. Tried another yellow unit but no difference and there is not enough adjustment in the manual colour registration adjustment to bring it into line.

                    With the other major brand I usually work with I would access the service programme and adjust the timing for the yellow drum motor but this feature doesn't appear to be available with Lexmark.

                    Any suggestions?


                    I tried the Lexmark helpline but after firmware and another drum unit the best they could come up with was try another toner, shesh!!!! I asked them to explain to be how a toner could affect the drum timing but they have yet to get back to me.
                    At least 50% of IT is a solution looking for a problem.

                    Comment

                    • Iowatech
                      Not a service manager

                      2,500+ Posts
                      • Dec 2009
                      • 3930

                      #11
                      Re: Lexmark C925DE Color Banding...unreal

                      Originally posted by Lagonda
                      Good Morning Gentlemen,
                      Its not often I visit this corner of CTN but I have a X925 in the workshop thats giving me grief.
                      It started with the above problem and a new yellow drum unit solved the problem. Now I can't get the yellow into registration with the other colours. Tried another yellow unit but no difference and there is not enough adjustment in the manual colour registration adjustment to bring it into line.

                      With the other major brand I usually work with I would access the service programme and adjust the timing for the yellow drum motor but this feature doesn't appear to be available with Lexmark.

                      Any suggestions?


                      I tried the Lexmark helpline but after firmware and another drum unit the best they could come up with was try another toner, shesh!!!! I asked them to explain to be how a toner could affect the drum timing but they have yet to get back to me.
                      I might not be the fullest toner cartridge here when it comes to Lexmarks, so feel free to ignore this.
                      Still, I'd check the color registration sensors to make sure they were clean. Also, the yellow laser, too.

                      Comment

                      • Lagonda
                        Service Manager

                        Site Contributor
                        1,000+ Posts
                        • Aug 2008
                        • 1649

                        #12
                        Re: Lexmark C925DE Color Banding...unreal

                        Originally posted by Iowatech
                        I might not be the fullest toner cartridge here when it comes to Lexmarks, so feel free to ignore this.
                        Still, I'd check the color registration sensors to make sure they were clean. Also, the yellow laser, too.
                        Yes, I've tried to not learn too much about them as well, but this box is taking up space in my workshop and won't go away. I eventually found the rego/ID sensors and gave them a clean but still no change. And as part of my fast learning curve on this disaster I'Ve discovered that they dont have lasers but a LED strip above each drum.
                        At least 50% of IT is a solution looking for a problem.

                        Comment

                        • Iowatech
                          Not a service manager

                          2,500+ Posts
                          • Dec 2009
                          • 3930

                          #13
                          Re: Lexmark C925DE Color Banding...unreal

                          Originally posted by Lagonda
                          And as part of my fast learning curve on this disaster I'Ve discovered that they dont have lasers but a LED strip above each drum.
                          Whoops, sorry about that!
                          On the other hand, this would suggest that there was a problem with the yellow drum drive, especially in the new yellow drum unit that you recently installed. Or, somewhat less likely that the LED assembly is out of position. But I imagine you've already checked those.
                          If possible, you might try starting a new post, as it appears that the more experienced Lexmark people have moved on. No need to listen to me bringing up the basics here when it probably won't help.

                          Comment

                          • Lagonda
                            Service Manager

                            Site Contributor
                            1,000+ Posts
                            • Aug 2008
                            • 1649

                            #14
                            Re: Lexmark C925DE Color Banding...unreal

                            Where did they move onto? Canon, Minolta, Ricoh?
                            At least 50% of IT is a solution looking for a problem.

                            Comment

                            • Iowatech
                              Not a service manager

                              2,500+ Posts
                              • Dec 2009
                              • 3930

                              #15
                              Re: Lexmark C925DE Color Banding...unreal

                              They are probably still on the Lexmark thread.
                              It's just that, while I don't have a lot of experience on Lexmarks, I have worked on color machines for a while, and I had a couple of general purpose suggestions that I thought might help.
                              As I didn't see any other Lexmark tech replies afterwards it looked like either I need to go away or if you start a new thread they would be more likely to give you the right answer.

                              Comment

                              Working...