Lexmark X658de, fuser error

[copyman]

I posted about this before having an intermittent fuser error
code, 924.01. Manual states it is a
thermistor.Someone suggested to replace the fuser
even though it only has 30k clicks on machine. I
went ahead and replaced the fuser. Still have error
code. I suspect pwr supply or controller? Anyone
have to replace either of these boards? Or any
other suggestions greatly appreciated.

Thanks in advance

[WesTek]

Re: Lexmark X658de, fuser error

I posted about this before having an intermittent fuser error
code, 924.01. Manual states it is a
thermistor.Someone suggested to replace the fuser
even though it only has 30k clicks on machine. I
went ahead and replaced the fuser. Still have error
code. I suspect pwr supply or controller? Anyone
have to replace either of these boards? Or any
other suggestions greatly appreciated.

Thanks in advance

Go LVPS if you have already replaced the fuser. OR you can check the pins on the LVPS to the System board. I just had one where the pins were not properly connecting to the system board, I bent them around a tiny bit and the fuser error was gone. Try pins first, replace LVPS second.