ricoh spc830dn and mpc3502/4502 fuser units

[mavetherave311]

is it possible to put a ricoh mpc3502/4502 fuser unit into a ricoh SPC830DN

[davel]

Re: ricoh spc830dn and mpc3502/4502 fuser units

Why would you, the printer version is much cheaper.

[fshead]

Re: ricoh spc830dn and mpc3502/4502 fuser units

I THink sometimes independant tech are limited what they have around..
I myself gut the older ricoh color printers for parts on the copier side.

[copier tech]

Re: ricoh spc830dn and mpc3502/4502 fuser units

is it possible to put a ricoh mpc3502/4502 fuser unit into a ricoh SPC830DN

Yes you can, same with the ITB, you just need to swap over a jumper & a few covers, compare the two.

[mavetherave311]

Re: ricoh spc830dn and mpc3502/4502 fuser units

Yes you can, same with the ITB, you just need to swap over a jumper & a few covers, compare the two.

thanks for the help guys,its just that ive got plenty of mfd fusers available to me

[blazebusiness]

Re: ricoh spc830dn and mpc3502/4502 fuser units

I have heard rumors that the fuser lamps are different in the C3502 and C4502. You can use the C4502 and C5502 fusers in the SP C830dn. The C3502/C3002 fuser may have compatibility issues and not last long.



MPC4502/5502 you can fit all kits from the SPC830, so PCDU, transfer, fuser/PTR
MPC4502/5502, change the complete connector assembly, easiest way to do it is take all the external covers off, unplug the lamp wiring from both sides and 3 screws (1 x earth screw and 2 x plug screws) swap them over and put covers back on and your done.
As for the MPC3002/3502, you do the same as above along with replacing the base plate of the fuser due to the fact when the fuser locks into the device, on the 3002/3502 it is located in a different spot and your done.

MP5000/5001/5002 will fit the Maintenance Kit A and B from the SP8200
MPC4500 you can fit any of the maintenance Kits from a SPC811dn, so PCDU, transer, fuser/PTR

MPC5000/5501 you can fit the SPC820dn maintenance kits in, so PCDU and transfer units are no problem, the MPC5000 will take the SPC820 fuser but wont fit in the MPC5501