richo sp201n sc556

[mramlawi]

dears
i have sp201n printer gives red light then tried to enter the service mode using the pc to make sc fuser rest but it didnt work by the way the machine counter is 2000k so i doont think the fuser must replace can some one give me explanation how to make clear correctly cos i have 4 same model printers 2 reset work i dont know how and two not
thanks

[GIUBOSS]

Re: richo sp201n sc556

before doing the reset did you check the thermistor if it has black crystal on it, measured the lamp etc?

[mramlawi]

Re: richo sp201n sc556

before doing the reset did you check the thermistor if it has black crystal on it, measured the lamp etc?

no honestly cos the machine counter less than 3000 print
and i face this problem with many of this series