C280 with error code C 2560

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fearless
    Technician
    • Jun 2015
    • 20
    #1

    [Error Code] C280 with error code C 2560

    Hello to all

    Has any body dealt with error code c 2560 on konicaminolta c280? what was the fix if you remember?

    thanks a lot

    Happy Thanks giving to all
    Tags: None
    • blackcat4866
      Master Of The Obvious
      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22545
      #2
      Re: C280 with error code C 2560

      Could it be C2561, C2562, C2563, or C2564? Printcopy does not show this as one of the possible codes. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • fearless
          Technician
          • Jun 2015
          • 20
          #3
          Re: C280 with error code C 2560

          it has to do with SV ERB OR PRCB-PWB .

            Comment

            • Woxner
              Senior Tech
              500+ Posts
              • Jul 2011
              • 795
              #4
              Re: C280 with error code C 2560

              if it turns out to be code from last post its a tcr error ( toner control) being dev ratio is off. may need to check tone add or try adding toner through toner add mode. anyhow all these codes are in the service on the machine. tells you what the error is.

                Comment

                Previous template Next
                Working...