Hi,
I want to print A5 job on A4 paper. For this i have tried every option available but when the print comes out, one side is not printed about 4 to 6 mm area. I have tried scaling up to 130 to 140 %, Fit-to-printable area, full bleed, custom settings every option but the print is incomplete. one side is mis-printed. It can be any side up, down, left or right.
I have also tried this on different machines but the result is same. Any suggestion or advice from any expert would be helpful and appreciated! ???
waiting
kind regards,
Copier Nerd
I want to print A5 job on A4 paper. For this i have tried every option available but when the print comes out, one side is not printed about 4 to 6 mm area. I have tried scaling up to 130 to 140 %, Fit-to-printable area, full bleed, custom settings every option but the print is incomplete. one side is mis-printed. It can be any side up, down, left or right.
I have also tried this on different machines but the result is same. Any suggestion or advice from any expert would be helpful and appreciated! ???
waiting
kind regards,
Copier Nerd
Comment