bizhub C226 C6756

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jwai
    Senior Tech

    500+ Posts
    • May 2018
    • 502
    #1

    bizhub C226 C6756

    Hello,

    Do anyone have this issue below:
    One C226 often showed C6756, first time I tried flat cable but still the same, and fixed by replaced CIS module.
    After 4 months the machine showed again, and replaced CIS again.
    After 4 months again, today, it display the same code again......

    What will cause this happen?
    Tags: c226, c6756, cis, replaced, showed
    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8105
      #2
      Re: bizhub C226 C6756

      Originally posted by jwai
      Hello,

      Do anyone have this issue below:
      One C226 often showed C6756, first time I tried flat cable but still the same, and fixed by replaced CIS module.
      After 4 months the machine showed again, and replaced CIS again.
      After 4 months again, today, it display the same code again......

      What will cause this happen?
      Could be a firmware bug, what version is it on?
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk
      ​

        Comment

        • jwai
          Senior Tech

          500+ Posts
          • May 2018
          • 502
          #3
          Re: bizhub C226 C6756

          Originally posted by copier tech
          Could be a firmware bug, what version is it on?
          Now it's using G00-11

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22937
              #4
              Re: bizhub C226 C6756

              On the Kyocera Saturn series the second side CIS failures were caused by a cooling fan failure, and subsequent overheating. On the Saturn series it was SOP to change the CIS and fan in the same procedure. Maybe this applies? =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • jwai
                  Senior Tech

                  500+ Posts
                  • May 2018
                  • 502
                  #5
                  Re: bizhub C226 C6756

                  Originally posted by blackcat4866
                  On the Kyocera Saturn series the second side CIS failures were caused by a cooling fan failure, and subsequent overheating. On the Saturn series it was SOP to change the CIS and fan in the same procedure. Maybe this applies? =^..^=
                  On bizhub C226, it seems not equipped with fan motor on scanner section.

                    Comment

                    • tsbservice
                      Field tech

                      Site Contributor
                      5,000+ Posts
                      • May 2007
                      • 7922
                      #6
                      Re: bizhub C226 C6756

                      Update firmware.
                      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                        Comment

                        • jwai
                          Senior Tech

                          500+ Posts
                          • May 2018
                          • 502
                          #7
                          Re: bizhub C226 C6756

                          I updated the F/W to G00-14, still same, finally fixed it by replaced CIS again.

                          This is the third time, no idea what would cause CIS damaged......

                            Comment

                            Previous template Next
                            Working...