View Full Version : Miscellaneous Ir adv 5051 fuser problem

Custom Search

06-18-2010, 11:05 PM
I have an image runner 5051 ,done 90k.The problem is the fuser bangs from the pressure roller being racked in continuously,It stops when mc comes to a standby condition,then starts continuously when copy start key/print is pressed.The paper prefeeds ,but mc just bangs,no error code is displayed,

06-19-2010, 01:15 AM
Pull out that fuser and inspect it.

The only issue I had so far was some noise coming from the fuser.

I replace the fixing film unit. Quite expensive part!

06-19-2010, 02:54 AM
There is a new fuser that just came out for noise. i haven't had a problem with these yet.

Custom Search