PDA

View Full Version : Di450 edh-3 pulls 2 sheets or more sometimes


Custom Search


Export100
06-01-2011, 05:31 PM
Does anyone know which parts need to be replaced to fix this?

rocky246
06-03-2011, 02:36 AM
Is there a seperation pad in front of the seperation roller? If not, that needs to be installed. Konicaminolta had a bulletin on that a loooong time ago. Bulletin #3379. Pad # 4641-3521-01 and Guide # 4641-3520-01. Also replace the seperation roller and feed rollers.

JustManuals
06-03-2011, 07:00 AM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

Export100
06-13-2011, 07:05 PM
No there was not and I just ordered those two parts. I did replace the separation roller and it helped but did not resolve the problem.

I will update you upon the installation of the guide and pad you suggested.

Thank you for your expertise.

Export100
06-21-2012, 08:30 PM
Thanks for that info. I fixed it with new rollers. However, I also purchased the
plastic guide you suggested but I have no idea where it goes. Also I cannot locate the bulletins you mentioned.

Thanks for your knowledge.

Scott

Export100
06-21-2012, 08:38 PM
Any thoughts as to a fix? I've looked for paper etc stuck in there but it looks ok. Anyone have a thought?

Thanks!

rocky246
06-22-2012, 10:05 PM
It is on Konicaminoltas website in SSD. Search solutions under DI550 and type in EDH-3. If I find the bulletin I will post it. I think thats where i found it the first time.

Export100
06-22-2012, 11:11 PM
Thanks! I did fix the EDF by shoving a piece of cardboard through the exit a few times. It must have been a staple or something stuck in there. I never did see exactly what it was that caused the crumpling but who cares, its fixed (for now).

rocky246
06-23-2012, 12:59 AM
This is the bulletin about the pad and guide.

Custom Search