7135 F35-1 Release latch?

[mrfuser]

Okay, rebuilt fuser due to many error codes on fuser. We still get an F35-1 and we go into 25 mode and clear it, but it comes back. Manual says we must "release latch" or it will return. What does "release latch" mean? Open and close front door or something?


Thanks all

Kelly

[SmellsHot]

25 mode, DIPSW settings, bit 3-1 change to OFF
Did you replace temp sensor and/or thermostat?

[mrfuser]

I clear the code, but the book says if we don't "release the latch" the code will come back. What is the "latch" it is referring to?

Kelly

[SmellsHot]

Clear it by resetting it in DIPSW's? (this is the latch they are referring to)
Did you replace sensors?

[mrfuser]

No, they meter out fine, should we replace anyway?

Kelly

[SmellsHot]

absolutely! Thats why your getting errors. If you can replace the temp sensors and stat, if your being cheap start with sensors and cleaned stat head

[CraigW]

White thermistor leads = BAD

Yellow thermistor leads = GOOD

[mrfuser]

Good to know on the leads. I had a set from a 7145 I can throw in there.

Thanks guys!

Kelly