Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    ir1435if fuser and dev issues

    Northwestservice's Avatar
    Join Date
    Jan 2011
    Location
    terrace,bc,canada
    Posts
    137
    Rep Power
    23

    ir1435if fuser and dev issues

    just putting it out there I have 2 1435 issue different machines. 1-machine has 40k on it I had to replace fuser unit at 20k and again 40k..using oem toner and parts, machine has not been jamming customer I know well and they run only 20lb bond paper. the film is pushing to the front wrinkling up and tearing canon Canada has no reported issues. 2- I have a dev. unit that has wear lines in the dev roller at 20k replaced dev unit for now. just seeing if anyone else has had these issues. I have like 40 units in my territory. other than these two issues seems to be okay small machines.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Oct 2012
    Location
    Belize
    Posts
    137
    Rep Power
    0

    Re: ir1435if fuser and dev issues

    I have experienced the same issues. torn film and lines on dev sleeve. just replace film or fuser and dev assembly parts

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Nov 2011
    Posts
    92
    Rep Power
    0

    Re: ir1435if fuser and dev issues

    Update the firmware to DCON V5.01
    Replace the two springs of the fixing unit. The new springs have a black line mark.

  4. #4
    Senior Tech 100+ Posts
    ir1435if fuser and dev issues

    Northwestservice's Avatar
    Join Date
    Jan 2011
    Location
    terrace,bc,canada
    Posts
    137
    Rep Power
    23

    Re: ir1435if fuser and dev issues

    thanks for replies I am just replacing components but it does lower the profit margins when parts are not lasting there life. you wouldn't have a part # for the springs with black mark?

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Nov 2011
    Posts
    92
    Rep Power
    0

    Re: ir1435if fuser and dev issues

    Quote Originally Posted by Northwestservice View Post
    thanks for replies I am just replacing components but it does lower the profit margins when parts are not lasting there life. you wouldn't have a part # for the springs with black mark?

    FE3-4230-000

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here