Printing quality c5235 c5255 with fiery.

**copier tech** · 10-01-2023, 09:55 AM

Re: Printing quality c5235 c5255 with fiery.

Originally posted by jvga2010

Hello Again

My problem now with another c5235 is when we try to print with UFR DRIVER. 3 photo files of 10 MB each one. It says processing for a long time and then it shows a message that was an error during the printing.

What can it be the cause? Because this machines should support this file size.

And also I have been told of the fiery quality. That would be better. But I have got a c5255 with b2 fiery and the problem is that when we print with the driver, it take longer than ufr ii, is it normal?

Thank you in advance

Sent from my iPhone using Tapatalk

Both devices should be able to print a 10MB file easily even without a Fiery.

I would start by updating the system software on the copier first see if that improves.

**wcanonw** · 10-01-2023, 02:51 PM

Re: Printing quality c5235 c5255 with fiery.

Hello, does the printer have server b2? If it has a B2 server, you must install the driver for imagepass b2, the most current one that you can get on the official Canon website.

**wcanonw** · 10-01-2023, 02:56 PM

Re: Printing quality c5235 c5255 with fiery.

If you are wanting to print with UFR, you must disable the server in COPIER-OPTION-INTERFACE-0 service mode. Then enter the IP address, subnet mask, default gateway. When you download the driver from the official Canon UFR2 site that ends in LT

**jvga2010** · 10-01-2023, 03:00 PM

Re: Printing quality c5235 c5255 with fiery.

Originally posted by copier tech

Both devices should be able to print a 10MB file easily even without a Fiery.

I would start by updating the system software on the copier first see if that improves.

So you mean I should reload the firmware ?

Sent from my iPhone using Tapatalk

**jvga2010** · 10-01-2023, 03:01 PM

Re: Printing quality c5235 c5255 with fiery.

Originally posted by wcanonw

Hello, does the printer have server b2? If it has a B2 server, you must install the driver for imagepass b2, the most current one that you can get on the official Canon website.

Yes I have done that but, the problem I noticed is that using the b2 driver for the same file takes longer to print than another machine without the fiery server and using ufr I driver. My question is if that is normal to happen.

Sent from my iPhone using Tapatalk

**wcanonw** · 10-01-2023, 03:02 PM

Re: Printing quality c5235 c5255 with fiery.

Canon UFR II/ UFRII LT Printer Driver

**wcanonw** · 10-01-2023, 03:06 PM

Re: Printing quality c5235 c5255 with fiery.

It is not normal for it to take a long time to print with the B2 server, try updating the server system. If the problem persists also in the ufrII driver option, update the firmware and check the ram memories.

**copier tech** · 10-02-2023, 08:31 PM

Re: Printing quality c5235 c5255 with fiery.

Originally posted by jvga2010

So you mean I should reload the firmware ?

Sent from my iPhone using Tapatalk

Well not exactly reload the firmware, you can simply update it.

**jvga2010** · 10-02-2023, 08:35 PM

Re: Printing quality c5235 c5255 with fiery.

Originally posted by copier tech

Well not exactly reload the firmware, you can simply update it.

How do I update it?

Sent from my iPhone using Tapatalk

**copier tech** · 10-03-2023, 09:14 PM

Re: Printing quality c5235 c5255 with fiery.

Originally posted by jvga2010

How do I update it?

Sent from my iPhone using Tapatalk

Either via the service mode or we can supply it for you to update via USB pen drive.

Feel free to contact us via either web link below to discuss.

Printing quality c5235 c5255 with fiery.

[CQ] Printing quality c5235 c5255 with fiery.

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment