Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Feb 2015
    Posts
    26
    Rep Power
    10

    "Fusing plug missing "

    I try removing and fitting the riser but nothing change.
    Attach is what appears in the panel



    Thanks in advance for your assistance


    Sent from my HUAWEI RIO-L01 using Tapatalk

  2. #2
    Master Of The Obvious 10,000+ Posts
    "Fusing plug missing "

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,531
    Rep Power
    295

    Re: "Fusing plug missing "

    It might be pertinent to know what model that you're considering.

    But just on the most basic level, there isn't any power to one of the power plugs. Find out why. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Feb 2015
    Posts
    26
    Rep Power
    10

    Re: "Fusing plug missing "

    Quote Originally Posted by blackcat4866 View Post
    It might be pertinent to know what model that you're considering.

    But just on the most basic level, there isn't any power to one of the power plugs. Find out why. =^..^=
    It's a Konica Minolta bizhub 654

    Sent from my HUAWEI RIO-L01 using Tapatalk

  4. #4
    Service Manager 1,000+ Posts
    "Fusing plug missing "

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,156
    Rep Power
    44

    Re: "Fusing plug missing "

    i take it this is not a U.S. machine? there is only a single 20A plug on the U.S. models.

  5. #5
    Technician
    Join Date
    Feb 2015
    Posts
    26
    Rep Power
    10

    Re: "Fusing plug missing "

    To be more specific it's a bizhub 654 .The machine has only done a 105 prints it was working well but as been not in use and switched off for some months and recently I try switching it on and it came up with the error "Fusing plug missing"

    Sent from my HUAWEI RIO-L01 using Tapatalk

  6. #6
    Junior Member
    Join Date
    Jan 2017
    Posts
    2
    Rep Power
    0

    Re: "Fusing plug missing "

    Hi, Has anyone solved this? Ran into same problem today. Cant find any Information regarding it. Thanks

  7. #7
    Junior Member
    Join Date
    Sep 2015
    Location
    Burlington,VT
    Posts
    4
    Rep Power
    0

    Re: "Fusing plug missing "

    Quote Originally Posted by jrn821 View Post
    Hi, Has anyone solved this? Ran into same problem today. Cant find any Information regarding it. Thanks
    I am having the same problem after doing an all clear for a c163. My take on it would be that the machine is confused and thinks its a model with a separate fuser plug.

    I figure a good place to start would be to set the correct time and time zone. This machine will only show tab number 8 Device information so not able to put correct time.

    what I ended up doing was turning off smart fusing control under system 2 in service mode.

  8. #8
    Junior Member
    Join Date
    Jan 2017
    Posts
    2
    Rep Power
    0

    Re: "Fusing plug missing "

    Quote Originally Posted by dlandry View Post
    I am having the same problem after doing an all clear for a c163. My take on it would be that the machine is confused and thinks its a model with a separate fuser plug.

    I figure a good place to start would be to set the correct time and time zone. This machine will only show tab number 8 Device information so not able to put correct time.

    what I ended up doing was turning off smart fusing control under system 2 in service mode.
    Ran into this again. Latest firmware resolved

  9. #9
    Field Supervisor 500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    870
    Rep Power
    44

    Re: "Fusing plug missing "

    Quote Originally Posted by jrn821 View Post
    Ran into this again. Latest firmware resolved
    Why not replied into this thread if FW resolve but now?!?
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

  10. #10
    Technician Walterj's Avatar
    Join Date
    Jun 2017
    Location
    Lima
    Posts
    31
    Rep Power
    5

    Re: "Fusing plug missing "

    Quote Originally Posted by slytukana View Post
    I try removing and fitting the riser but nothing change.
    Attach is what appears in the panel



    Thanks in advance for your assistance


    Sent from my HUAWEI RIO-L01 using Tapatalk

    good day
    Dears
    The error mentioned usually happens when the NF1 board is damaged
    It is possible to repair it you have to have some knowledge in electronics
    Greetings

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here