There is a bulletin saying to check voltages.
1. Voltage
Please confirm the voltage of No.1 ˜ No.3. (No.2 and No.3 are same connector.)...
nullskull
Learning
Last Activity: 9 hours ago
Joined: 08-10-2023
Location: Chihuahua
-
Ok, I found it. The board looks good.
That's the fuse just above the plug on the right hand side.
My next thought would be to...Leave a comment:
-
If the CIS is the issue then I have a spare in a different machine i could swap and see if that solves it?Leave a comment:
-
yeah shame on me. send me to jail. it's a internet forum i only go on here to wait for someone to respond to my technical issues....Leave a comment:
-
No I'm saying don't remember all the details is that the lawfare had some improper use of escalating the misdemeanor charges to felonies without properly...Leave a comment:
-
you're just diverting again
ok buddy
how can you say you know the future?...Leave a comment:
-
Hello, yes I forgot to mention that. Either the spring or the magnet I used to try fish it out could have done that. The ICP1 is a LED I'm guessing?...Leave a comment:
-
Hello do you have a link to this bulletin. I don't know how to find it. Would someone be able to share it?...Last edited by nullskull; 4 days ago.Leave a comment:
-
Are these the timing belts that usually get messed up? The part circled on the left is the wheel with a sensor around it.
...Leave a comment:
-
Hello Yes I tried trouble reset twice and no change. I'm just so confused cause it seems like i didn't do anything to cause a board to fail....Leave a comment:
-
C-6753 error on 754e
I was taking apart the DF-704 in order to replace the rollers and such. Of course the spring underneath the bottom feeding roller housing popped out... -
The 34 time convicted felon is funny because those aren't even valid charges as they have no connected evidence...Leave a comment:
-
the way you put words together makes me want to vomit
The way you always end something with "seems like poetic justice to me" or...Leave a comment:
-
Do you mean the white powder lubricant?...Leave a comment:
-
I swapped drums and for now there appears to be no problems...Leave a comment:
-
seems back to normal to me
https://eggprices.org
gas isn't at 2 but isn't crazy high
https://gasprices.aaa.com...Leave a comment:
-
No i don't care what they say I still think he was killed....Leave a comment:
-
the lubricant for the transfer belt? Or what do you mean exactly?...Leave a comment:
-
First page bad on 3070L Black issue.
This 3070L is printing the first page/pages poorly. As pictured below the first page for both jobs are smudged with lines running parallel with the paper... -
so you're just that upset because you'd have to wait till tax season to get you money?...Leave a comment:
No activity results to display
Leave a comment: