Luism
Luism
Technician
Last Activity: 1 week ago
Joined: 12-29-2024
Location: Mar Del Plata
-
It's correct, 100% agree... -
First solve the white band to see if the problem is there, (you can put a strip of white paper to test) then see the developer to see if it spreads toner...Leave a comment:
-
Does the scanner move correctly? If you place it to the right, look for the home position?Leave a comment:
-
Yes, correct, the bottom has a white band to establish the white pattern, if it is not white enough you can throw the codeLeave a comment:
-
Hello. Under the exposure glass there is a white band, change it or change the glass for one from another machineLeave a comment:
-
Hello, you have to load all the full firmware againLeave a comment:
-
They are at the bottom of the machine, on the chassis, you must remove several elements, back cover, charging plate and polarization, (there are three...Leave a comment:
-
You must have a current leak in the terminals of the machineLeave a comment:
-
Hello, I will try to change the End block polarization and cylinder load sopsLeave a comment:
No activity results to display
Leave a comment: