Hi guys, we have a lot of Ricoh MP5500/6001/7000/7500 series.
Sometimes they have this problem:
The amount of developer inside...
180 results in 0.0415 seconds.
-
Drum damaged by developer on Ricoh MP5500/6001/7000/7500 etc series
-
Canon ir3580 - yellow color displaced and flooding all prints
Dears
On my Canon the printed pages are full of yellow color. The result per page gets worse, especially with multiple prints.
It... -
Streaking on 7045
Okay got a KM 7045 that I'm now supporting for a customer... dealing with image quality issues, I got a new drum and put it in. I couldn't get anything... -
rc 4500 error code t4 it says that the color is overflow
it says the error is
T4
is an ink overflow condition. You may need to check andclean out ink section of drum. Remove the ink then... -
Samsung CLP 510 OPC Drum Cleaning Blade
Hi,
I will appreciate your help with this:
I need a supplier for Cleaning Blade of the OPC unit for a Samsung CLP-510 color... -
8500 thin black lines
thin line appear in main scaning direction after long series of printin
i supose the cleaning blade was the problem
any s... -
KM 3650W light image only in center area
KM 3650W light image only in center area... in the test print no 1... the dots and lines very light only in center area...
we changed... -
clc 4000
can any one give me instructions how to replace drum cleaning blade for clc 4000
thanks -
Would like to know some tips and tricks to prolong my drum life
If anybody can let us in some tips and trick to prolong our drum life, that will be some money savers. Please share with us some of that knowledge.... -
Canon IR105+ Part Number
Hello
Can you help me to find this gear part number (the brown one).
... -
MX2300 cyan in the black cleaning unit??
new customer so don't know history of issues. Waste toner not very full. When print in black there is a cyan stripe about 1/4 of page going from front...Last edited by Sam Tofu; 06-02-2011, 07:58 PM. -
one strip on the copy of 2035
One strip of toner appeared on the copies , please guide me this problem pertain to which part(s)?
This toner band is close only one side of charge... -
toshiba e studio 350
I changed the developer, drum, drum cleaning blade and corona wires. 2-questions.
#1 i ran the procedure for new developer is there one for new... -
bizhub 600 error code c-2203
getting error codec-2203, replaced drum motor and adjusted blade (thought blade might be binding) but did not replace blade, customer mainly prints... -
Image Problem
how to solve the problem of the copy image like this ....
Thanks For you All......
