Hi guys.
I have an issue on a LS-507 stacker unit. These units are not common so getting good support on them seems to be a problem. So i...
8 results in 0.0098 seconds.
-
Accurio Press 6136 LS-507 Entance Jams
-
FS536 Grippers out of sync.
We have a BizHub 808 with FS536 about 1.3 million on the machine. The front (operator side) gripper will get out of time with the rear one, causing severe... -
Inner finisher F-1 gripper assembly
Getting e-532-001 codes and jams with this inner finisher F-1. It acts like the gripper assembly is not getting out of the way of the stapler unit. Does... -
Canon iR 2525i gripper finisher problem
Hello all!
I've got Canon 2525 on service. While replacing this part: FC9-6678-000 1 RAIL, GRIPPER MOVABLE in inner finisher b1, I accidently "touched"... -
CPP500 toning cyan across page?? HELP!
We just installed a new cyan corona wire assy, cyan developer, cyan drum & we'e getting very light blue streaking across the top 17" edge &...Last edited by Keystone2; 08-27-2009, 02:22 AM. -
Master Disposal Issue
I have a GR 3770 that will not remove the old master from the drum. The drum clamp opens and the machine cycles then stops and advises remove master from... -
Riso GR3750 Master slips down:
My Riso GR 3750 print image slips down from the gripper as much as 1/4" within 1000 copies. This is especially annoying when trying to print a 2... -
RICOH Aficio 1022 Toner Low
I have 4 Ricoh 1022 copiers that have all had the same issue so I'm looking for a better answer than what I've been doing.
The copier will...
