34 results in 0.0215 seconds.
-
281C keeps going into rotations
We just got a low mileage 281C less than 25k on it once it warme up it goes into a mini rotation about every 60-90 seconds rotates for about 5-10 seconds...otherwise... -
Sharp 6200 color registration
Been having an issue with registration on 2 different 6200's. I bring them into spec using the adjustments in sim 50 and after the machine calibrates... -
canon ir 3200 : yellow toner cartrige not detect
hello my fren..
i'm in trouble now.. my canon ir 3220 cannot detect yellow cartrige after i refill them..
what should i do?
also..... -
MX5001N - "Wavy" prints, pic attached
My Sharp MX5001N is printing like this today (see attached PDF). It's wavy but the waves are diagonal. Does anyone know what causes this? The toner is... -
IRC2380i Stuck is standby
hi all,
Ive got a iR2380i that I couldnt wake up out of standby once it entered it its self. The only way to get it to work is to switch off the... -
Pro1356 with GBC Streampunch
Guys, I've got one of these that jams when doing duplex but only if there is alot of toner coverage (examples are photos or skyshots). It works 100% when... -
MXM700N
Hello all:
I have a brain buster for you all. I have an mxm-700n with about 750,000 copies on it. The problem i am having is the waste toner... -
canon iRC3220
Hi to all
Can any one know the life (peper coun.) of the CANON IRC3220 drum unit .
THANKS... -
Sharp MX3501N
Getting Maintenance Code DK constantly flashing. What does this code mean? -
MX-4501N
Hello,
I only sold few color copier's from Sharp wich im maintaining too.
At about 50k color and 78k black ive changed Primary transfer... -
HP 2550 wont come to ready
I have a customer with above mentioned printer. She says she changed toner and the system wouldnt come to a ready state.
I looked at the... -
IR2800 No didplay
Hi guys, can anyone shed some light on this. we have been to an ir2800 with no display. When you power up the machine you get the peripherals making their... -
Bizhub 420, jamming and toner issues...
Took on a new customer with a few issues in the box and had some questions. I did a machine history and there were a lot of jamming codes, mostly from... -
IRC3220
Does anyone know what the numbers for drum life under display/misc relate too? I'm wondering if they are the life percentage used. This machine shows... -
PWB failure on MX 3501
Brand new MX 3501, less then 1500 total, B/W and Color, the sub driver PWB goes bad, you can see the burn mark from the chip that went south, this PWB...
