Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Technician Tecnico_Xerox's Avatar
    Join Date
    Jan 2019
    Location
    Santiago
    Posts
    15
    Rep Power
    2

    Re: Xerox 700 cyan dots on prints

    Hi.
    It is as if the gears that activate the cleaning system of the cylinder were not working,
    in some cases these gears are split or released and do not rotate causing the residue of the cylinder is not transferred to the waste bottle, this generates
    residual toner accumulate in the cylinder cleaning blade and lower seal and fall to the IBT.
    Perform a check of the Drive to see in which state the gears are and if they are working.

    Good luck

  2. #12
    Technician
    Join Date
    Apr 2019
    Location
    Wien
    Posts
    10
    Rep Power
    1

    Re: Xerox 700 cyan dots on prints

    Broken cyan spiral for exit wastetoner from cyan drum then acumulate in drum unit and drop...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here