Touch Panels once again.....

Collapse
X
Collapse
 
  • Page of 4
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
  • Tonerbomb
    AutoMajical Resolutionist

    Site Contributor
    2,500+ Posts
    • Feb 2005
    • 2589
    #31
    Re: Touch Panels once again.....

    Originally posted by Hansoon
    Now I'm confused. What goes to what?

    Also, do all of the above touch panels have the same failure rate? Which one would be the most important to have in stock?

    Thanks

    Hans
    the B223 and the H310 are the most common failures. However you can't get the xxxx9900 panels from mother Ricoh any longer, the 9900 panels were no charge parts shipped from Ricoh to dealers based on machine population. Now you have to order the correct part # and pay Ricoh's nominal fee.......
    Mystic Crystal Revelations

      Comment

      • Hansoon
        Field Supervisor

        Site Contributor
        2,500+ Posts
        • Sep 2007
        • 3374
        #32
        Re: Touch Panels once again.....

        Thanks Tonerbomb.

        Hans
        “Sent from my Intel 80286 using MS-DOS 2.0”

          Comment

          • Hansoon
            Field Supervisor

            Site Contributor
            2,500+ Posts
            • Sep 2007
            • 3374
            #33
            Re: Touch Panels once again.....

            Guys, please, before I jump off a cliff, please tell me to what Kyocera machine / series this control unit belongs.......

            Hans
            Attached Files
            “Sent from my Intel 80286 using MS-DOS 2.0”

              Comment

              • Debs1964
                Service Manager

                1,000+ Posts
                • Oct 2010
                • 1689
                #34
                Re: Touch Panels once again.....

                Originally posted by Tonerbomb
                the B223 and the H310 are the most common failures
                I've only ever had to replace one H310, however I have replaced loads of B223 and D029
                There are 10 types of people in this world, those who understand binary maths and those who don't

                  Comment

                  • blackcat4866
                    Master Of The Obvious

                    Site Contributor
                    10,000+ Posts
                    • Jul 2007
                    • 22997
                    #35
                    Re: Touch Panels once again.....

                    It's the same generation as the CS-C4035 and the CS-8030. To tell for sure, what is the part number on the op panel PWB? There will be at least two numbers printed on it: one is the PWB assy, the other is the blank printed circuit board. Include both numbers. =^..^=
                    If you'd like a serious answer to your request:
                    1) demonstrate that you've read the manual
                    2) demonstrate that you made some attempt to fix it.
                    3) if you're going to ask about jams include the jam code.
                    4) if you're going to ask about an error code include the error code.
                    5) You are the person onsite. Only you can make observations.

                    blackcat: Master Of The Obvious =^..^=

                      Comment

                      • Hansoon
                        Field Supervisor

                        Site Contributor
                        2,500+ Posts
                        • Sep 2007
                        • 3374
                        #36
                        Re: Touch Panels once again.....

                        Cat, this is what I have:
                        Attached Files
                        “Sent from my Intel 80286 using MS-DOS 2.0”

                          Comment

                          • katash
                            Trusted Tech
                            • May 2010
                            • 221
                            #37
                            Re: Touch Panels once again.....

                            Originally posted by Hansoon
                            Not responding touch panels often can be repaired as long as the problem lays in the connection of the flat ribbon cable.

                            However, many customers irritated by the non responsive Touch Function use excessive force and sharp objects such as pens to operate the panels. Furthermore some of our colleagues try to revive not responding Touch Panels by putting them in an oven at high temperatures. This all results in invisible damage to the thin plastic foil on top of the glass pane making a repair impossible.

                            For this reason we intend to supply in the future brand new aftermarket Touch Panels in such cases where repair is not possible anymore.

                            To offer a complete assortment for as many models we like to know once again which models from what manufacturers are suffering from not responding Touch Panels.

                            Kindly post here the manufacturers name and model knowing to have been affected.

                            Many thanks in advance

                            Hans

                            touchpanel[at]rex-technika.com
                            mpc 4500 mpc2500 ricoh

                              Comment

                              • Kidaver
                                Ghoulscout

                                500+ Posts
                                • Apr 2011
                                • 912
                                #38
                                Re: Touch Panels once again.....

                                Hans that looks a lot like a 3050, 4050, 5050 op panel...but that's just eyeballing it.
                                "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

                                  Comment

                                  • blackcat4866
                                    Master Of The Obvious

                                    Site Contributor
                                    10,000+ Posts
                                    • Jul 2007
                                    • 22997
                                    #39
                                    Re: Touch Panels once again.....

                                    The 2GR part is the product code for the CS-5050 or KM-5050, like Kidaver said. =^..^=
                                    If you'd like a serious answer to your request:
                                    1) demonstrate that you've read the manual
                                    2) demonstrate that you made some attempt to fix it.
                                    3) if you're going to ask about jams include the jam code.
                                    4) if you're going to ask about an error code include the error code.
                                    5) You are the person onsite. Only you can make observations.

                                    blackcat: Master Of The Obvious =^..^=

                                      Comment

                                      • mad
                                        Technician
                                        • Jul 2010
                                        • 25
                                        #40
                                        Re: Touch Panels once again.....

                                        Originally posted by Hansoon
                                        Cat, this is what I have:
                                        do you have a front panel picture?

                                        or what are the screen dimensions?

                                          Comment

                                          • mrwho
                                            Major Asshole!

                                            Site Contributor
                                            2,500+ Posts
                                            • Apr 2009
                                            • 4299
                                            #41
                                            Re: Touch Panels once again.....

                                            Didn't read the whole thread, so sorry if I'm going to ask a question already answered:

                                            Do you have a catalog online where we can check and order those panels? Where do you ship from and do you ship worldwide?

                                            Cheers!
                                            ' "But the salesman said . . ." The salesman's an asshole!'
                                            Mascan42

                                            'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
                                            Ibid

                                            I'm just an ex-tech lurking around and spreading disinformation!

                                              Comment

                                              • Hansoon
                                                Field Supervisor

                                                Site Contributor
                                                2,500+ Posts
                                                • Sep 2007
                                                • 3374
                                                #42
                                                Re: Touch Panels once again.....

                                                No website (yet). Sorry.

                                                We have as follows:

                                                A) # 4037-7807-01.01

                                                Touch Panel, compatible for use in:
                                                Develop ineo + 350, ineo + 450, QC 2235plus,
                                                ineo + 300, ineo + 250, ineo + 351, ineo + 251
                                                Konica-Minolta bizhub C 250, bizhub C 350,
                                                bizhub C 450, bizhub C 351, bizhub C 300,
                                                bizhub C 352, bizhub C 252
                                                Olivetti d-color MF 22, d-color MF 45,
                                                d-color MF 25, d-color MF 30, d-color MF 35,
                                                d-color MF25 plus
                                                Color Models
                                                OEM PN: 4037-7807-01 / 56AA87551
                                                -------------------------------

                                                B) # 4040-7809-01.01

                                                Touch Panel, compatible for use in:
                                                Develop ineo 250, ineo 350
                                                Konica-Minolta bizhub 250, bizhub 350
                                                B&W Models
                                                OEM PN: 4040-7809-01
                                                --------------------------------------

                                                C) # 20052012

                                                Touch Panel, compatible for use in:
                                                Konica-Minolta, bizhub C 203, bizhub C 353
                                                Develop ineo + 203, ineo + 353 only
                                                Olivetti d-color MF 201 plus, d-color MF 350,

                                                ONLY FOR ABOVE COLOR MODELS!

                                                OEM PN: none, used in Control Panel #A02E M710 02 only.
                                                --------------------------------------


                                                D) # 20102012

                                                Touch Panel, compatible for use in:
                                                Konica-Minolta, bizhub C 253
                                                Develop ineo + 253
                                                Olivetti d-color MF 250

                                                ONLY FOR ABOVE COLOR MODELS!

                                                OEM PN: none, used in Control Panel #A02E M700 01 only.
                                                --------------------------------------


                                                E) # 302FB25191.01

                                                Touch Panel, compatible for use in:
                                                Kyocera-Mita KM-C 2520, KM-C3225,
                                                KM-C3232, KM-C2525E, KM-C3225E,
                                                KM-C3232E, KM-C4035E, KM 6030,
                                                KM 8030
                                                Triumph Adler DCC 2520, DCC 2625,
                                                DCC 2525, DCC 2532, DCC 2632,
                                                DCC 2635, DC 2060, DC 2080
                                                UTAX CDC 1520, CDC 1625, CDC 1525,
                                                CDC 1532, CDC 1632, CDC 1635, CD 1060,
                                                CD 1080
                                                Color Models
                                                OEM PN: 302FB25191
                                                --------------------------------------


                                                F) # 302H094271.01

                                                Touch Panel, compatible for use in:
                                                Kyocera-Mita KM-2560,3060, Taskalfa 300i, / Copystar CS2560, 3060, CS300i
                                                OEM PN: 302H094271
                                                --------------------------------------


                                                G) # 302GR45040.01

                                                Touch Panel, compatible for use in:
                                                Kyocera-Mita KM-3050, KM-4050, KM-5050 (I) / Copystar CS-3050, CS-4050, CS-5050
                                                OEM PN: 302GR45040


                                                Contact us please for a quotation:

                                                touchpanel[at]rex-technika.com (replace [at] with @ because of spammers.

                                                Hans
                                                “Sent from my Intel 80286 using MS-DOS 2.0”

                                                  Comment

                                                  • blackcat4866
                                                    Master Of The Obvious

                                                    Site Contributor
                                                    10,000+ Posts
                                                    • Jul 2007
                                                    • 22997
                                                    #43
                                                    Re: Touch Panels once again.....

                                                    Originally posted by Hansoon
                                                    ...

                                                    E) # 302FB25191.01

                                                    Touch Panel, compatible for use in:
                                                    Kyocera-Mita KM-C 2520, KM-C3225,
                                                    KM-C3232, KM-C2525E, KM-C3225E,
                                                    KM-C3232E, KM-C4035E, KM 6030,
                                                    KM 8030
                                                    Triumph Adler DCC 2520, DCC 2625,
                                                    DCC 2525, DCC 2532, DCC 2632,
                                                    DCC 2635, DC 2060, DC 2080
                                                    UTAX CDC 1520, CDC 1625, CDC 1525,
                                                    CDC 1532, CDC 1632, CDC 1635, CD 1060,
                                                    CD 1080
                                                    Color Models
                                                    OEM PN: 302FB25191
                                                    --------------------------------------

                                                    Hans
                                                    Within E) you can also include: KM-2540, KM-3040, CS-2540, CS-3040
                                                    If you'd like a serious answer to your request:
                                                    1) demonstrate that you've read the manual
                                                    2) demonstrate that you made some attempt to fix it.
                                                    3) if you're going to ask about jams include the jam code.
                                                    4) if you're going to ask about an error code include the error code.
                                                    5) You are the person onsite. Only you can make observations.

                                                    blackcat: Master Of The Obvious =^..^=

                                                      Comment

                                                      • Hansoon
                                                        Field Supervisor

                                                        Site Contributor
                                                        2,500+ Posts
                                                        • Sep 2007
                                                        • 3374
                                                        #44
                                                        Re: Touch Panels once again.....

                                                        Great! Good to know. Thanks Cat!

                                                        Hans
                                                        “Sent from my Intel 80286 using MS-DOS 2.0”

                                                          Comment

                                                          • Hansoon
                                                            Field Supervisor

                                                            Site Contributor
                                                            2,500+ Posts
                                                            • Sep 2007
                                                            • 3374
                                                            #45
                                                            Re: Touch Panels once again.....

                                                            Great! Good to know. Thanks Cat!

                                                            Hans
                                                            “Sent from my Intel 80286 using MS-DOS 2.0”

                                                              Comment

                                                              Previous 1 2 3 4 template Next
                                                              Working...