DF629 front to back adjustment

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sandy007
    • Jun 2025
    #1

    DF629 front to back adjustment

    Hi, I have a brand new DF629 installed on a brand new C258, the copies on the glass are fine and square but through the ADF the copies are moving up the page by about 3-4mm and leave a dark shadow line at the bottom of the image. It is not skewing, how do i adjust the front to back scan image on the ADF, is it through the service mode (can't see it)? or is it a manual adjustment? Many thanks
    Tags: adf, adjustment, copies, df629, image
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37236
      #2
      Re: DF629 front to back adjustment

      Why would you post a problem in the newbie forum? I would tell you which technical forum to use had you included the make of the machine as many manufacturers use the same or similar models. Post in the correct technical forum.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22996
          #3
          Re: DF629 front to back adjustment

          Welcome!

          I believe that the manual covers this issue. Have a peek. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • Sandy007
              #4
              Re: DF629 front to back adjustment

              Originally posted by blackcat4866
              Welcome!

              I believe that the manual covers this issue. Have a peek. =^..^=
              Thank you for your quick response, i have since found the 'anti skew guide' which came in the box, doh!, and fixed the issue

                Comment

                • Sandy007
                  #5
                  Re: DF629 front to back adjustment

                  Originally posted by slimslob
                  Why would you post a problem in the newbie forum? I would tell you which technical forum to use had you included the make of the machine as many manufacturers use the same or similar models. Post in the correct technical forum.
                  Thank you for your warm welcome to a Newbie I will definitely post in the correct forum from now on considering now i'm no longer a newbie.

                  I have since found the 'anti skew guide' which came in the box, doh!, and fixed the issue

                  Going forward i feel as though you have built up my confidence to post again, in the correct technical forum.

                  P.S. It was a Konica Minolta make of machine.

                    Comment

                    Previous template Next
                    Working...