un petit nouveau

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bricolo13
    Junior Member
    • Feb 2025
    • 5

    #1

    un petit nouveau

    Bonjour a tous,

    un petit nouveau sur le forum, j'ai à titre perso une canon ir C2230I,

    à bientot
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37505

    #2
    Originally posted by bricolo13
    Bonjour a tous,

    un petit nouveau sur le forum, j'ai à titre perso une canon ir C2230I,

    à bientot
    a newbie 1 hour ago Hello everyone, a newbie on the forum, I personally have a canon ir C2230I, see you soon
    This is a mostly English speaking or at least understanding, Learn ti use a translator.

    Comment

    • Aneurysm
      Administrator

      1,000+ Posts
      • Jan 2005
      • 1081

      #3
      Bienvenue sur Copytechnet, si vous avez besoin d'aide technique, c'est l'endroit idéal. Si vous postez une question technique, vous devez la traduire en anglais avant de la publier pour obtenir de bonnes réponses. De plus, il y a un paramètre dans le coin inférieur gauche de la plupart des pages pour afficher le site en français, les articles seront toujours en anglais mais les menus et autres s'afficheront en français.

      (Welcome to Copytechnet, If you need any technical help this is the place to be. If you post a technical question, you should translate it into English before posting it to get good responses. Also, there is a setting in the lower left corner of most pages to display the site in French, posts will still be in English but menus and other will display in french. )
      "Remain calm. All is well." -Chip Diller, Nov 1963

      Comment

      • bricolo13
        Junior Member
        • Feb 2025
        • 5

        #4
        thanks for your feedback, I don't speak a word of English but I will use a translator.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 23008

          #5
          From @bricolo13:

          Hello everyone,
          a newbie on the forum, I have a canon ir C2230I,
          see you soon

          Bienvenue!
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

          Comment

          • Larhal
            Retired

            Site Contributor
            VIP Subscriber
            500+ Posts
            • May 2013
            • 577

            #6
            Bienvenue dans la communauté
            Larhal

            Retired

            If all else fails read the Service Manual!

            If that fails, meet me at the pub and we will discuss it.

            Comment

            • GIUBOSS
              Service Manager

              Site Contributor
              1,000+ Posts
              • Jul 2013
              • 1436

              #7
              welcome among us

              Comment

              Working...