Lanier Fuser issue

[dgrow]

I have been working on a lanier ld 550c color machine for about two weeks for the same problem. Documents coming out of drawer 1 in portrait position are jamming. When paper does make it through there is a small fold /crease in the middle of the lead edge. The machine doesn't jam if I run letter-r of legal or ledger for that matter. I have replaced fingers, the fuser rollers, entrance and exit plates on the fuser. I cannot tell if the fold/crease is occuring in the fuser or before it enters. Does anyone have any suggestions?

[prntrfxr]

Stop the machine in the middle of the print test before the paper gets to the fuser.

[dgrow]

lanier 550 folding in fuser

Stop the machine in the middle of the print test before the paper gets to the fuser.

thanks i stopped paper before and looks good first sheet is usaully good its the third page and on i was thinking feed rollers it does it in tray 1 & 2 with letter paper only than catches in fuser exit plate and rapes around roller.

Thanks
Don