Scanning Reduction

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cmsuto
    Junior Member
    • Sep 2011
    • 3
    #1

    Scanning Reduction

    As per tittle. For copying it is fine. But when it comes to scan the size will automatically reduce, it can even see the feeder belt at the edge of side of the document. I have tried to do the common setting but failed. Any givers can help me.

    Thanks in advance.
    Tags: None
    • kingarthur
      Service Manager

      1,000+ Posts
      • Feb 2008
      • 1320
      #2
      Re: Scanning Reduction

      a make/model might help...then maybe put it in the forum of that particular make...
      Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22996
          #3
          Re: Scanning Reduction

          On most of the MFPs I see, you can designate the original scan size. When we know what model we'll be able to offer some advice. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            Previous template Next
            Working...