Not Printing in straight line

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • princepriyu
    • Dec 2024
    #1

    Not Printing in straight line

    Canon IR 3300
    Not Printing in straight line
    printing ZIG ZAG even when i do a photocopy or print from a PC
    Looking at this I have replaced with a brand new OPC DRUM
    but problem is unsolved
    Printing Problem.jpgPrinting Proble.jpg
    Tags: ir3300, line, print, printing, zig zag printing
    • Brian8506
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2009
      • 1623
      #2
      Re: Not Printing in straight line

      Laser unit.


      Sent from my iPad using Tapatalk

        Comment

        • Brian8506
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2009
          • 1623
          #3
          Re: Not Printing in straight line

          Looks like you also have a drum problem. Did you put in a new OEM?


          Sent from my iPad using Tapatalk

            Comment

            • princepriyu
              #4
              Re: Not Printing in straight line

              Originally posted by Brian8506
              Looks like you also have a drum problem. Did you put in a new OEM?


              Sent from my iPad using Tapatalk

              tried with two new OPC drums
              NO CHNAGE
              Prints same

                Comment

                • Brian8506
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Feb 2009
                  • 1623
                  #5

                    Comment

                    • Brian8506
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Feb 2009
                      • 1623
                      #6
                      Re: Not Printing in straight line

                      Have you checked dv unit for vertical lines problem.


                      Sent from my iPad using Tapatalk

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22698
                          #7
                          Re: Not Printing in straight line

                          Originally posted by Brian8506
                          Have you checked dv unit for vertical lines problem.


                          Sent from my iPad using Tapatalk
                          His images are LEF. That's the laser motor speed varying. All laser as far as I'm concerned. =^..^=
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                            Comment

                            • allan
                              RTFM!!

                              5,000+ Posts
                              • Apr 2010
                              • 5445
                              #8
                              Re: Not Printing in straight line

                              There are snake skin patterns on that print. Some arching somewhere?
                              Seen this kind of thing but without the funky zig-zaging.
                              A voltage leak from the mag roller to the drum somehow.
                              In your pic you can see its only from one end.


                              Wow its the weirdest thing i have seen in a while.
                              Where it arch from the one end it draws a void to the other.
                              The zig-zag looks like an added effect.
                              Whatever

                                Comment

                                • KenB
                                  Geek Extraordinaire

                                  2,500+ Posts
                                  • Dec 2007
                                  • 3946
                                  #9
                                  “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

                                    Comment

                                    • tsbservice
                                      Field tech

                                      Site Contributor
                                      5,000+ Posts
                                      • May 2007
                                      • 7635
                                      #10
                                      Re: Not Printing in straight line

                                      Looks like you may have 2 separate problems. Like others said Laser unit and probably developer unit mag roller.
                                      A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                                      Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                                        Comment

                                        • Gab
                                          Senior Tech
                                          • Aug 2015
                                          • 633
                                          #11
                                          Re: Not Printing in straight line

                                          Is scaner at the optics moves smoothly? Check it.

                                            Comment

                                            Previous template Next
                                            Working...