[Error Code] E302-001 Canon Image Runner Advance 6075

[813200217]

I am not a technician
just an end user

My two Canon machines Ir advance 6075 have Error e302-001
Is there any way to resolve this problem
i just want to DE ACTIVATE the adf scanner
this machine has double sided scanner function
i don't really need this function
i already try to unplug the adf scanner unit, it gave error e280

Please note
I want to use the Adf (automatic document feeder) just for one side
i don't want to spend money for the function (double side scan) that never be used

[adhy]

Re: E302-001 Canon Image Runner Advance 6075

I am not a technician
just an end user

My two Canon machines Ir advance 6075 have Error e302-001
Is there any way to resolve this problem
i just want to DE ACTIVATE the adf scanner
this machine has double sided scanner function
i don't really need this function
i already try to unplug the adf scanner unit, it gave error e280

Please note
I want to use the Adf (automatic document feeder) just for one side
i don't want to spend money for the function (double side scan) that never be used

Why are you unplug the adf scanner? The double sided Will not active when it's not setting on

[copier tech]

Re: E302-001 Canon Image Runner Advance 6075

I am not a technician
just an end user

My two Canon machines Ir advance 6075 have Error e302-001
Is there any way to resolve this problem
i just want to DE ACTIVATE the adf scanner
this machine has double sided scanner function
i don't really need this function
i already try to unplug the adf scanner unit, it gave error e280

Please note
I want to use the Adf (automatic document feeder) just for one side
i don't want to spend money for the function (double side scan) that never be used

Most likely you just need to clean the optics.

• Code: E302-0001
• Description:Error in paper front shading.
  Error in shading RAM access, or the shading value is either below or higher than the reference level.
• Remedy:1. Connector disconnection/open circuit of the Scanner Unit (Reader). 2. Connector disconnection/open circuit of the Reader Controller PCB (PCB1). 3. Failure of the Scanner Unit (Reader). 4. Failure of the Reader Controller PCB (PCB1). 5. Update the system software.

[813200217]

Re: E302-001 Canon Image Runner Advance 6075

Why are you unplug the adf scanner? The double sided Will not active when it's not setting on

Every time I use the adf for scanning document (for one side or two sided, It became error.)
But when i scan the document NOT using the adf, it doesn't error

what i mean "unplug the adf scanner"
i just unplug the scanner unit ini adf
not the whole adf unit

[813200217]

Re: E302-001 Canon Image Runner Advance 6075

Most likely you just need to clean the optics.

• Code: E302-0001
• Description:Error in paper front shading.
  Error in shading RAM access, or the shading value is either below or higher than the reference level.
• Remedy:1. Connector disconnection/open circuit of the Scanner Unit (Reader). 2. Connector disconnection/open circuit of the Reader Controller PCB (PCB1). 3. Failure of the Scanner Unit (Reader). 4. Failure of the Reader Controller PCB (PCB1). 5. Update the system software.

already clean the optics.
the last solution from my hired technician
1. failure of the scanner unit (in adf unit), replace it cost me $ 110
2. replace all the adf unit, replace it cost me $ 250

the scanner unit in adf, it just needed when scan two sided automatically
i never used that function

[copier tech]

Re: E302-001 Canon Image Runner Advance 6075

already clean the optics.
the last solution from my hired technician
1. failure of the scanner unit (in adf unit), replace it cost me $ 110
2. replace all the adf unit, replace it cost me $ 250

the scanner unit in adf, it just needed when scan two sided automatically
i never used that function

Try updating the firmware & then run CCD adjust as per the service manual.

[Hishamawada]

Re: E302-001 Canon Image Runner Advance 6075

Hello ,

When you set the Scan to Full Color Or Gray Scale it should work properly . Your Issue might be only on B/W Scanning.

The issue is not in the scanner unit , the issue is that when the scanner unit calibrates itself before starting the scan, the values are not in range which will lead to the error.

Remove the small glass at the left and clean the white section at the bottom of it. also you will need to remove the glass for the top scanner unit and also clean the white section .

[Brian8506]

Re: E302-001 Canon Image Runner Advance 6075

A lot of paper dust in adf scanner will cause that.

[813200217]

Re: E302-001 Canon Image Runner Advance 6075

Hello ,

When you set the Scan to Full Color Or Gray Scale it should work properly . Your Issue might be only on B/W Scanning.

The issue is not in the scanner unit , the issue is that when the scanner unit calibrates itself before starting the scan, the values are not in range which will lead to the error.

Remove the small glass at the left and clean the white section at the bottom of it. also you will need to remove the glass for the top scanner unit and also clean the white section .

my hired technician already did that
it didn't solve the problem

you're right..
i already knew that
so when i need to use the adf,
i use the scan and store function
and then i select full color or grayscale
i can use the adf, there is no error

the document is black and white, scan using full colour or grayscale
the scan result is not very good.

can you upload the picture, where to clean it

[Brian8506]

Re: E302-001 Canon Image Runner Advance 6075

my hired technician already did that
it didn't solve the problem

you're right..
i already knew that
so when i need to use the adf,
i use the scan and store function
and then i select full color or grayscale
i can use the adf, there is no error

the document is black and white, scan using full colour or grayscale
the scan result is not very good.

can you upload the picture, where to clean it

[copier tech]

Re: E302-001 Canon Image Runner Advance 6075

my hired technician already did that
it didn't solve the problem

you're right..
i already knew that
so when i need to use the adf,
i use the scan and store function
and then i select full color or grayscale
i can use the adf, there is no error

the document is black and white, scan using full colour or grayscale
the scan result is not very good.

can you upload the picture, where to clean it

Did your tech update the firmware & run CCD adjust?

[derrekflo]

Re: E302-001 Canon Image Runner Advance 6075

hello there is a bulletin for that problem.Códigos de error E302-0001.pdfCódigos de error E302-0001.pdf

[tinnyjay]

Re: E302-001 Canon Image Runner Advance 6075

I am not a technician
just an end user

My two Canon machines Ir advance 6075 have Error e302-001
Is there any way to resolve this problem
i just want to DE ACTIVATE the adf scanner
this machine has double sided scanner function
i don't really need this function
i already try to unplug the adf scanner unit, it gave error e280

Please note
I want to use the Adf (automatic document feeder) just for one side
i don't want to spend money for the function (double side scan) that never be used

Clean the glass strip inside adf scanner.