iR-ADV 4735i w/ cheapo ADF

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • onlyinnewfoundland
    Trusted Tech

    100+ Posts
    • Apr 2013
    • 235
    #1

    [CQ] iR-ADV 4735i w/ cheapo ADF

    Hi guys

    I have two of these units, one is a 4735 and the other is a 4725 and they use the cheaper ADF (non-single pass) DADF BA-1 I think it is.

    Copy from glass is perfect

    ADF has this weird wiggle in the scan. Seems like the paper is skewing and getting pinched somewhere but it's hard to detect which is a little surprising since it has basically no paper path and nothing to smash into.

    One of these units is brand new.

    See samples

    First page is off glass and seems fine.
    Second page is through ADF.

    3264_001.pdf
    Tags: adf, glass, page, paper, units
    • Tricky
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 2621
      #2
      Re: iR-ADV 4735i w/ cheapo ADF

      Is there a height adjustment for the left-hand side of the doc feeder.

        Comment

        • zoraldinho
          teacher-guide-expert-guru

          Site Contributor
          5,000+ Posts
          • Mar 2008
          • 5002
          #3
          Re: iR-ADV 4735i w/ cheapo ADF

          On previous models, you had to set the platen cover
          and the screw on the upper side of the adf.
          If it ain't broke, don't fix it
          A picture is worth a thousand words

            Comment

            • onlyinnewfoundland
              Trusted Tech

              100+ Posts
              • Apr 2013
              • 235
              #4
              Re: iR-ADV 4735i w/ cheapo ADF

              Hey guys, turns out ADF was actually sitting quite high upon further inspection.

              Lowered ADF then did some tweaking to adjust the small amount of skew.

              Seems fine now.

              Cheers

                Comment

                Previous template Next
                Working...