Canon service support tool

[JustManuals]

Re: Canon service support tool

Hello, I need latest SST software for IR2800. We get optional fax board module and need to upgrade firmware... Can you email me on fragolan@gmail.com

1st post and need need need. Not even so much as a 'Please' or 'Thank you'

[teckat]

Re: Canon service support tool

thread closed.png

[gensys]

Re: Canon service support tool

It is necessary to close this Thread

[gensys]

Re: Canon service support tool

Try this link

Link removed by administrator

and download SST v452

About the beginning it is necessary to read > forum rules

His post has been reported

Darings immediately

[JustManuals]

Re: Canon service support tool

Your first post, and you totally disregard this Forum's Rules and Regulations

Can't you Read

Obviously not, his post has been reported. Me thinks his days here are numbered.

[teckat]

Re: Canon service support tool

Try this link

Link Removed by Administrator

and download SST v452

Your first post, and you totally disregard this Forum's Rules and Regulations

Can't you Read

[hay_76]

Re: Canon service support tool

I need irc3170 for me too, that most of color copier Must use the firmware is not alot of problm.
i got 2 unit of that m/c always give trobl

[hay_76]

Re: Canon service support tool

For the Code 602 i already Format the Hdd(used) after put in the m/c cant use long time is't the Hdd jam o broken o came again 602

[Choro1dal]

Re: Canon service support tool

Sorry, should have added to my earlier post, I already have the new cable, it's just the latest version of SST i need.

[teckat]

Re: Canon service support tool

USB-Parallel cable (FY9-4368-000)

The FY9-4154-000 USB-Parallel Adapter is not supported on Windows Vista or Windows 7.
The FY9-4368-000 USB-Parallel Adapter and Service Support Tool Version 4.33Ez or later is required for Windows Vista or Windows 7.

READ PDF>>>>>>>>>>>>>-----SST_WINDOWS 7_TP11.pdf

[mrfixit51]

Re: Canon service support tool

Hi, I'm currently running SST 4.22 and I'm about to upgrade to WIN 7. As the old version doesn't support USB to Parallel on Win 7 I would be grateful If someone could provide me with version 4.33 Ez or NAVI 2.31.

T.I.A.

You still are not going to be able to use the old USB to Parallel Nethawk cable with Win 7, no matter what version of SST you use. You would need the newer cable, which I do not have the part number for, but I am sure someone will pop up and provide that number. My advice is to hang onto your old laptop to service the older boxes that require the parallel port. I saved an old lappy that had the parallel port installed.

[Choro1dal]

Re: Canon service support tool

Hi, I'm currently running SST 4.22 and I'm about to upgrade to WIN 7. As the old version doesn't support USB to Parallel on Win 7 I would be grateful If someone could provide me with version 4.33 Ez or NAVI 2.31.

T.I.A.

Re: Canon service support tool

Hello, I need latest SST software for IR2800. We get optional fax board module and need to upgrade firmware... Can you email me on fragolan@gmail.com

[JustManuals]

Re: Canon service support tool

Hi,
Please mail me Canon Service Support Tool latest version FOR IR5000
amazoncybercafe@gmAIL.COM

THX

Why would somebody do that? It's not like you contribute to the board, or that you'll be back if some other asshole gives it to you.

Re: Canon service support tool

Hi,
Please mail me Canon Service Support Tool latest version FOR IR5000
amazoncybercafe@gmAIL.COM

THX