Dirty Prints ... help irc2880 - Copytechnet.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

maurimx

Trusted Tech

100+ Posts

Join Date: Feb 2009

Posts: 116
#1

Dirty Prints ... help irc2880

03-27-2010, 02:00 AM

I am using 200 gram card stock..
And when we print, the white paper becomes grayish... Like a thin gray veil is being left on the paper...

any help ? adjusting the fuser temp ? any other ideas ??
Tags: 200, 880, adjusting, dirty, fuser, grayish, heavy, irc, irc2880, jpg, lef, left, paper, print, prints, service, set, setting, stock, temp, thin, white
SCREWTAPE

East Coast Imaging

Site Contributor
2,500+ Posts

Join Date: Jan 2009

Posts: 3396
#2

03-27-2010, 02:18 AM

Are you using the stack bypass and setting the machine up for Heavy2?
Comment
maurimx

Trusted Tech

100+ Posts

Join Date: Feb 2009

Posts: 116
#3

03-27-2010, 02:26 AM

yeah, stack bypass, heavy 2...
Comment
maurimx

Trusted Tech

100+ Posts

Join Date: Feb 2009

Posts: 116
#4

03-27-2010, 02:57 AM

http://img191.imageshack.us/img191/8089/ka208.jpg
Comment
SCREWTAPE

East Coast Imaging

Site Contributor
2,500+ Posts

Join Date: Jan 2009

Posts: 3396
#5

03-27-2010, 04:07 AM

When was the last time you replaced your drums?
I dont' think adjusting your fuser temp is going to help you much.
Comment
Canuck

Tech Specialist

1,000+ Posts

Join Date: Nov 2007

Posts: 1713
#6

04-04-2010, 09:49 PM

Looks like it needs a service call
Comment
Gerhard

Technician

50+ Posts

Join Date: Oct 2009

Posts: 99
#7

04-06-2010, 06:05 PM

Is prints OK on normal 80gsm ?
Stop print before enters the fuser!
Are these prints or copies ?

Regards
Gerhard

sigpic

Life is a Journey enjoy the ride !!!
Comment

Previous template Next

Working...