We've had a number of 2 series machines (ci or i) that are intermittently not fusing. The remedy for this is
System Menu>Common Settings>Original/Paper...
114 results in 0.0257 seconds.
-
2 Series not fusing
-
Xerox j75 fuser temp
Hi
I have xerox j75
Th toner is not fixer in 300g
Cant I increase temp and pressure by nvm chaine
... -
Xerox 7220 fusing temp adjust
How can be increased the fusing temp on Xerox 7220 for plain paper? Not fusing well only on color. -
how much is too much in adjusting fuser temp on a MPC3503
greetings all.
I ve been out of the loop for a almost a year due to some health issues which now are taken care of.
I finally rebuilt 3 mpc2503,mpc3503... -
458E fuser issue
458e. Power on and device comes to ready to print. Fuser (non IH) is cold to the touch, service mode shows 190 c and fluctuating. Constant fuser jams..What... -
C558 C3825 Fuser under temp only on duplex ¯\_(ツ)_/¯.
Like the title.
Works just fine on single sided...
Under Level History 1 you can see the temp drop after about 3 pages and kazam... -
Cold Mx 850rt
Literally put them in my armpits to warm them up enough to work, the prefeed roller was new also, the right most one was room temp. Not the first time... -
MP C6004 paper curling
I have lowered the fuse temp, in all places to do so,
1-1105 fc center was default i set to 125
1-1106 fc press was default i set to 112... -
M5521cdw fuser temp adjust?
We have a client with a few of these that all seem to work fine except one. Distributor says we need to adjust fuser temp. Anyone know how? -
Light Ghosting on Linen paper only "KonicaMinolta Accurio Press C2070"
What I've done so far.
- Confirmed substrate is on the approved list.
- installed embossed belt with transfer springs and changed... -
Ricoh MP4055 japanese language after replacing NVRAM In IOB Board
Hi guys
A clients MP4055 emitted SC544-02.
We have changed fuser and executed the following:
1) SP5,810-002
2)... -
C1070 error C3911
Got this error code and can't get it to go away, changed thermistor and temp sensor *th1 and ts1
Cleared the code but just comes back... -
taskalfa range and kfs
Hey guys, i have multiple machines ranging from taskalfa 2552 up to the taskalfa 6003 that continue to send through this error, Machine failure. Call... -
Sharp mxm 266n
Paper curling coming out of exit, seems to happen a lot with this model,any input ? Fuser temp adjustment maybe? Fuser looks good.any input thanks Da... -
MP 6503 SC541/542
This MP 6503 has a code of sc541-02, and sc542-02. The history shows a similar issue about a year ago. The tech replaced the thermisters, and when that...
