[Jamming] IR 2270, 0108 & 0207 jams

[xeroid]

New cassette rollers and right door pads. Some copies that don't jam have a slight fold/bend toward the trail edge. Tried incresing and decreasing LOOP CST but bending was the same. There is always a copy LE through the fuser just past the fuser exit sensor. Only 90K everything looks great. Any Help greatly appreciated

[teckat]

Re: IR 2270, 0108 & 0207 jams

New cassette rollers and right door pads. Some copies that don't jam have a slight fold/bend toward the trail edge. Tried incresing and decreasing LOOP CST but bending was the same. There is always a copy LE through the fuser just past the fuser exit sensor. Only 90K everything looks great. Any Help greatly appreciated

add an extra wrap to sensor PS13, which is the fixing outlet sensor
Set Loop CST to a lower value.
The default is 63; with a range of -128 to +127.
Check your 2nd Delivery Unit
Check the operation of the Fixing delivery reverse flapper item number 17 shown in Figure 140 the Right Door Assembly. + check for any damage to claw
140.jpg