Canon clc 3100 error code E020 1F1 Help PLEASE

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • The clk man
    Technician

    50+ Posts
    • Apr 2010
    • 86

    #46
    Re: Canon clc 3100 error code E020 1F1 Help PLEASE

    Originally posted by teckat
    YES/
    I'm going to replace the harness now. Wish me luck Good Sirs.

    Comment

    • MULEME STEPHEN.K
      Technician
      • Oct 2011
      • 20

      #47
      Re: Canon ir3300 service manual

      Help senior technicians with the following ir 3300 service manual ,and ir 2018 i will be very great full or you can tell me the detaits.

      Comment

      • The clk man
        Technician

        50+ Posts
        • Apr 2010
        • 86

        #48
        Re: Canon clc 3100 error code E020 1F1 Help PLEASE

        Originally posted by The clk man
        I'm going to replace the harness now. Wish me luck Good Sirs.
        Dang... didn't work. Could the problem be the circuit boards that the harness plugged into?

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083

          #49
          Re: Canon clc 3100 error code E020 1F1 Help PLEASE

          u probably have a short to frame ground ( a broken ground wire or a frayed wire touching metal )

          u need to check your Power Supply DC in/out & for blown fuses ) remove & check fuses
          this is difficult on this model/ if u swap a working power supply to a printer that has a frame short> it will cause the fuse on Power Supply to open-
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

          Comment

          • The clk man
            Technician

            50+ Posts
            • Apr 2010
            • 86

            #50
            Re: Canon clc 3100 error code E020 1F1 Help PLEASE

            I'm thinking about giving up on this copier. A friend of mine has a bizhub 250 do you think this would work for me?

            1. I do approx 2,500 color copies a month
            2. I do approx 1000 sheets of card stock a month.
            3. would the bizhub 250 be stout enough for a small print shop?

            Comment

            • teckat
              Field Supervisor

              Site Contributor
              10,000+ Posts
              • Jan 2010
              • 16083

              #51
              Re: Canon clc 3100 error code E020 1F1 Help PLEASE

              Originally posted by The clk man
              I'm thinking about giving up on this copier. A friend of mine has a bizhub 250 do you think this would work for me?

              1. I do approx 2,500 color copies a month
              2. I do approx 1000 sheets of card stock a month.
              3. would the bizhub 250 be stout enough for a small print shop?
              NO
              Konica has the worst customer service/ poor Support>for people who do not purchase contracts

              Look for a used low meter count> iR3220
              **Knowledge is time consuming, exhausting and costly for a trained Tech.**

              Comment

              • The clk man
                Technician

                50+ Posts
                • Apr 2010
                • 86

                #52
                Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                Originally posted by teckat
                NO
                Konica has the worst customer service/ poor Support>for people who do not purchase contracts

                Look for a used low meter count> iR3220
                Thank you Sir, and I thank you for you're valiant effort to help me. My old clc 3100 and the clc 2400 before that served my print shop well. I was almost sold on the bizhub 250 until you set me straight. The only thing I have to offer you, for you're help, is my ability to try to make you laugh. I can't tell a joke for the life of me, but give me a topic, and I will do my best.

                Comment

                • The clk man
                  Technician

                  50+ Posts
                  • Apr 2010
                  • 86

                  #53
                  Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                  Is the Canon 3380 any good?

                  Comment

                  • teckat
                    Field Supervisor

                    Site Contributor
                    10,000+ Posts
                    • Jan 2010
                    • 16083

                    #54
                    Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                    Originally posted by The clk man
                    Is the Canon 3380 any good?
                    Decent Machine / but needs a good maintenance schedule set-up/ & a trained tech to service this is a must on this model-

                    Fix unit is tricky to work on-
                    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    • The clk man
                      Technician

                      50+ Posts
                      • Apr 2010
                      • 86

                      #55
                      Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                      What about this one. Could I rebuild this one? Canon imageRunner C3220 Color Network, Copy, Print, Fax, Scan, U-Send | eBay

                      Comment

                      • teckat
                        Field Supervisor

                        Site Contributor
                        10,000+ Posts
                        • Jan 2010
                        • 16083

                        #56
                        Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                        Originally posted by The clk man
                        Total Meter reading is not posted ?? what is it ???>
                        Fix units are purchased as refurbed ones/ no in-field repair
                        ITB (Transfer Belt unit) a needed repair requires a trained tech

                        for Network printing u have two options
                        Color Network Multi-PDL Printer Kit- A2 (Optional)
                        imagePASS- C1 v.2 (Optional)
                        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        • The clk man
                          Technician

                          50+ Posts
                          • Apr 2010
                          • 86

                          #57
                          Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                          Originally posted by teckat
                          Total Meter reading is not posted ?? what is it ???>
                          Fix units are purchased as refurbed ones/ no in-field repair
                          ITB (Transfer Belt unit) a needed repair requires a trained tech

                          for Network printing u have two options
                          Color Network Multi-PDL Printer Kit- A2 (Optional)
                          imagePASS- C1 v.2 (Optional)
                          Sir, do you happen to have a ir3220 that I could buy?

                          Comment

                          • teckat
                            Field Supervisor

                            Site Contributor
                            10,000+ Posts
                            • Jan 2010
                            • 16083

                            #58
                            Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                            sorry, do not sell printers-

                            best bet> go to a Canon Authorized dealer to purchase one/ they will demonstrate it on site

                            I would never buy a imageRunner or any other Printer online> site unseen>

                            u don't know what u get>

                            people promise the world - post stock images of printers & exaggerated photos of a neat & organized warehouse >
                            try to return a lemon printer bought online
                            **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                            Comment

                            • The clk man
                              Technician

                              50+ Posts
                              • Apr 2010
                              • 86

                              #59
                              Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                              Originally posted by teckat
                              sorry, do not sell printers-

                              best bet> go to a Canon Authorized dealer to purchase one/ they will demonstrate it on site

                              I would never buy a imageRunner or any other Printer online> site unseen>

                              u don't know what u get>

                              people promise the world - post stock images of printers & exaggerated photos of a neat & organized warehouse >
                              try to return a lemon printer bought online
                              The Canon dealer wants $4500 for a 3380 is that a good price?

                              Comment

                              • teckat
                                Field Supervisor

                                Site Contributor
                                10,000+ Posts
                                • Jan 2010
                                • 16083

                                #60
                                Re: Canon clc 3100 error code E020 1F1 Help PLEASE

                                Originally posted by The clk man
                                The Canon dealer wants $4500 for a 3380 is that a good price?


                                what's included ??
                                have they offered a service contract ??

                                this printer needs a trained tech
                                **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                                Comment

                                Working...