canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #16
    Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

    Originally posted by roadster
    thanks - will keep looking - just saw it for sale local to me...
    don't forget to check those connectors ---


    who told u motor was bad ????
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • roadster
      Technician
      • Aug 2012
      • 33

      #17
      Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

      Thanks for tip about connectors.....

      Local copier repair/ service guy says it is motor - stated this over the phone when i told him error code - i am really at his mercy as need to get it up and running
      Last edited by roadster; 09-18-2012, 05:21 PM. Reason: wording

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #18
        Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

        Originally posted by roadster
        Thanks for tip about connectors.....

        Local copier repair/ service guy says it is motor - stated this over the phone when i told him error code - i am really at his mercy as need to get it up and running
        NO Color trained CLC1100 Series Tech can diagnose this E 072 error on the phone/
        Canon does not even support this series anymore--


        if I told u home many tech pubs concern this error over the past 10 years--u would faint


        some things that can contribute to E072

        1-Transfer Drawer connector/WIRE HARNESS
        2-A bent separation claw drive plate( that brass leaf plate that rides along transfer drum metal teeth )
        3-Transfer driver PCB
        4-Cracked Frame connector
        5-Cleaner Brushes locked up(paper jammed inside behind rollers)
        6-Door switches (supplied voltage)
        7-DC FUSE PCB
        8-Transfer Cleaning Assembly(housing could be warped or the bearings could be seizing)

        I could go on & on
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • roadster
          Technician
          • Aug 2012
          • 33

          #19

          Comment

          • zoraldinho
            teacher-guide-expert-guru

            Site Contributor
            5,000+ Posts
            • Mar 2008
            • 5002

            #20
            Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

            I had only 2 motor errors in 15 years.
            If it ain't broke, don't fix it
            A picture is worth a thousand words

            Comment

            • roadster
              Technician
              • Aug 2012
              • 33

              #21
              Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

              Thanks for reply, it is just so flustrating trying to get someone local and knows as much as you guy to take a look.. would really like to stick with my 1180...

              Comment

              • teckat
                Field Supervisor

                Site Contributor
                10,000+ Posts
                • Jan 2010
                • 16083

                #22
                Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                Originally posted by roadster
                Thanks for reply, it is just so flustrating trying to get someone local and knows as much as you guy to take a look.. would really like to stick with my 1180...
                if a tech is not trained on this model or has heavy experience from shop repair/ field repair -

                they are just looking at a manual to see what likely points to error/
                it took Canon field supervisors over two years (1999 > 2002 to try and pinpoint these E072 ERRORS
                **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                Comment

                • roadster
                  Technician
                  • Aug 2012
                  • 33

                  #23
                  Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                  Thanks again - think i am going to go for: Ricoh SPC 430DN

                  Comment

                  • teckat
                    Field Supervisor

                    Site Contributor
                    10,000+ Posts
                    • Jan 2010
                    • 16083

                    #24
                    Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                    Originally posted by roadster
                    Thanks again - think i am going to go for: Ricoh SPC 430DN



                    CLC1100 SERIES = repair_testequipment.gif
                    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    • mbgemini
                      Technician
                      • Nov 2011
                      • 18

                      #25
                      Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                      Originally posted by roadster
                      Thanks for prompt replies - i do not know a thing about this clc1180 - all looks very complicated inside - do you think it would be an expensive fix if i called a repairman out..
                      I've got two copiers with ceramic toners too (clc1100 and clc700); I spent 4-5 years in studying guides and manuals. Lots of my problems were so simple, I would have spent too much money calling techs. If you've never seen and used a copier you should spend time in studying (operator's manual first - colorPass user Guides - Service Manual), you could not solve problems with changing it. Ceramic toners cost TOO much to waste them away. I had a service manual from technicians of my copiers, but I've also found it on Internet. If you need something let me know. Good luck!

                      Best regards, Barbara

                      Comment

                      • teckat
                        Field Supervisor

                        Site Contributor
                        10,000+ Posts
                        • Jan 2010
                        • 16083

                        #26
                        Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                        Originally posted by mbgemini
                        I've got two copiers with ceramic toners too (clc1100 and clc700); I spent 4-5 years in studying guides and manuals. Lots of my problems were so simple, I would have spent too much money calling techs. If you've never seen and used a copier you should spend time in studying (operator's manual first - colorPass user Guides - Service Manual), you could not solve problems with changing it. Ceramic toners cost TOO much to waste them away. I had a service manual from technicians of my copiers, but I've also found it on Internet. If you need something let me know. Good luck!

                        Best regards, Barbara


                        Over the years there have been over 35 tech pubs just on E072/ those pubs are long gone and not available anymore> unless u saved them-

                        a user or novice on those models is usually lost when it comes to that error/ service manuals will not help on that error> it points to a source direction > that's useless unless u have worked in the field to experience that error-

                        we don't even give contracts on those models anymore & charge 275.00 hr. to service w/ no guarantee on solutions


                        glad to hear about your determination on studying up on this old product/ but somewhat useful printer--
                        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        • roadster
                          Technician
                          • Aug 2012
                          • 33

                          #27
                          Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                          Originally posted by mbgemini
                          I've got two copiers with ceramic toners too (clc1100 and clc700); I spent 4-5 years in studying guides and manuals. Lots of my problems were so simple, I would have spent too much money calling techs. If you've never seen and used a copier you should spend time in studying (operator's manual first - colorPass user Guides - Service Manual), you could not solve problems with changing it. Ceramic toners cost TOO much to waste them away. I had a service manual from technicians of my copiers, but I've also found it on Internet. If you need something let me know. Good luck!

                          Best regards, Barbara
                          Hi Barbara, Thanks for reply, have downloaded service manual from the internet - but error code: e072002 could be many things.... i would love to get my clc 1180 up and running the ceramic print quality is the best - but i am now looking to go down the ricoh route... you are the first person i have found who uses clc for ceramic printing - thanks for taking the time to reply...

                          Comment

                          • charm5496
                            Service Manager

                            Site Contributor
                            1,000+ Posts
                            • Apr 2008
                            • 2387

                            #28
                            Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                            Originally posted by teckat
                            Over the years there have been over 35 tech pubs just on E072/ those pubs are long gone and not available anymore> unless u saved them-

                            a user or novice on those models is usually lost when it comes to that error/ service manuals will not help on that error> it points to a source direction > that's useless unless u have worked in the field to experience that error-

                            we don't even give contracts on those models anymore & charge 275.00 hr. to service w/ no guarantee on solutions


                            glad to hear about your determination on studying up on this old product/ but somewhat useful printer--
                            I still have all my techs pubs on this beast. We still support 3 of them that use the device for promotional type products. No contracts - $125 for every 30 minutes we are there and they eat up the fuser rollers, t-sheets and drums in all of them. Great revenue for us though!
                            Accidents don't just happen. They must be carelessly planned.

                            Comment

                            • mbgemini
                              Technician
                              • Nov 2011
                              • 18

                              #29
                              Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                              Originally posted by teckat
                              Over the years there have been over 35 tech pubs just on E072/ those pubs are long gone and not available anymore> unless u saved them-

                              a user or novice on those models is usually lost when it comes to that error/ service manuals will not help on that error> it points to a source direction > that's useless unless u have worked in the field to experience that error-

                              we don't even give contracts on those models anymore & charge 275.00 hr. to service w/ no guarantee on solutions

                              No, I havent that pubs, only SM, and I've seen E072 is a difficult error. I haven't found it in my copiers for now, I hope to never found it in the future .
                              In effect I'm not a tech, only a very trained operator - I suppose I could easily become a tech with a teacher - In the last few years I learned to solve lots of my copier errors thanks to my SM, my passion in these machines, and this site too, but I don't pretend to feel like a tech.


                              Originally posted by teckat
                              ...glad to hear about your determination on studying up on this old product/ but somewhat useful printer--
                              we came across these clc machines cause someone - years ago - proposed them for the specifical job we wanted to do: printings with ceramic toners to apply on tiles. If you take a look to the site of the only italian producer of ceramic toners, they still propose CLC 11xx series systems among with other Ricoh models. http://www.balteadc.it/sistemi_en.html
                              Problems are still frequents, but for now I have to make the best of a bad situation !

                              Comment

                              • mbgemini
                                Technician
                                • Nov 2011
                                • 18

                                #30
                                Re: canon clc 1180 - 1012 ( clc 1100 ) error code: E072002 help please

                                Originally posted by charm5496
                                I still have all my techs pubs on this beast. ...
                                You could even share them !! ... so you could become one of my teachers!!

                                Comment

                                Working...