[CQ] Print quality of iRC3080i

[tee2520]

10676146_10205134411538136_4583955329152703879_n.jpg

10530869_10205134411258129_8182060473945990269_n.jpg

The example and test PG10 as above, please advise.Thank you

[ernesto]

Re: Print quality of iRC3080i

[ATTACH=CONFIG]26930[/ATTACH]

[ATTACH=CONFIG]26931[/ATTACH]

The example and test PG10 as above, please advise.Thank you

Hi, it could be useful

http://www.copytechnet.com/forums/canon/92834-irc2380-poor-black-solids.html

Once all of the above is done...... it has been said that it could be HVT 2 (high voltage pcb number 2 )(FK2-0489-000).

All the best

[copier tech]

Re: Print quality of iRC3080i

Yes this is the same fault I have, not quite as bad, I would start with a new OEM drum, even if it is not yet up to 100% if the drum fixes the fault you can rule out a charge/HVT fault.

If the fault returns look at toner supply issues.

What does the K DENS % show? should be around 0%, -4% means low black toner density