canon ir 3045 freqent jam

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • daddy boat
    Junior Member
    • May 2015
    • 4

    #1

    [Jamming] canon ir 3045 freqent jam

    i am working on a canon ir 3045 which jams frequently in the fixing unit.what should i do.thanks
  • mramlawi
    Senior Tech

    500+ Posts
    • Jul 2011
    • 838

    #2
    Re: canon ir 3045 freqent jam

    Originally posted by daddy boat
    i am working on a canon ir 3045 which jams frequently in the fixing unit.what should i do.thanks
    tell us the jam code , check the heater sensor some time the sensor broken in the middle of it theres a small plastic check it ,the jam occur on one sided or 2 sided
    Distinguished road makes you jewel in rough

    Comment

    • Brian G
      Technician
      • Mar 2015
      • 21

      #3
      Re: canon ir 3045 freqent jam

      Check the duplex inverter guide that sits on the door, specifically the foam pads that it rests on. When they get old the guide sits too low in them and gets stuck which will keep the paper from exiting the fuser properly. Also posting the jam code does help others help you.

      Comment

      • daddy boat
        Junior Member
        • May 2015
        • 4

        #4
        Re: canon ir 3045 freqent jam

        thanks you very much.

        Comment

        • copier tech
          Field Supervisor

          5,000+ Posts
          • Jan 2014
          • 8104

          #5
          Re: canon ir 3045 freqent jam

          Also if you are fitting just the fixing films, not the fixing film unit then these will cause fuser jams & smudging etc.
          Let us eat, drink, and be merry, because tomorrow we may die!

          For all your firmware & service manual needs please visit us at:

          www.copierfirmware.co.uk - www.printerfirmware.co.uk

          Comment

          Working...