i am working on a canon ir 3045 which jams frequently in the fixing unit.what should i do.thanks
canon ir 3045 freqent jam
Collapse
X
-
-
Re: canon ir 3045 freqent jam
tell us the jam code , check the heater sensor some time the sensor broken in the middle of it theres a small plastic check it ,the jam occur on one sided or 2 sidedDistinguished road makes you jewel in rough -
Re: canon ir 3045 freqent jam
Check the duplex inverter guide that sits on the door, specifically the foam pads that it rests on. When they get old the guide sits too low in them and gets stuck which will keep the paper from exiting the fuser properly. Also posting the jam code does help others help you.Comment
-
-
Re: canon ir 3045 freqent jam
Also if you are fitting just the fixing films, not the fixing film unit then these will cause fuser jams & smudging etc.Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Comment
Comment