FS-533 First page of stapled set does not align with rest of sheets

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • EarthKmTech
    Step aside, noob

    1,000+ Posts
    • May 2009
    • 2139
    #1

    FS-533 First page of stapled set does not align with rest of sheets

    First time I've experienced this on one of these.

    Guide number 7 on the stapler unit develops a nick in it from normal usage which catches only the fist sheet and stops it going all the way back into the stapler. All sheets after it go over the top of it to the back no problems.

    Screen Shot 2016-11-04 at 3.17.36 pm.jpg

    Good news is that it works without it just fine. Remove it and problem solved.

    This is what the nick looks like:

    IMG_0261.JPG
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: FS-533 First page of stapled set does not align with rest of sheets

      Good catch. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Synthohol
          Certified Konica Expert

          Site Contributor
          5,000+ Posts
          • Mar 2016
          • 5793
          #3
          Re: FS-533 First page of stapled set does not align with rest of sheets

          Wow, i had a similar one today. the exit mylar on a 1052 finisher. there was a doubled up black mylar on the upper exit "feed me Seymour" gate.
          had a nice split in it and caused intermittent 7217 jams.
          nice info KM, i see that once in a while.
          Attached Files
          We know a thing or two because we've seen a thing or two.
          The medication helps though...

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              Re: FS-533 First page of stapled set does not align with rest of sheets

              Does it look like this?:
              Attached Files
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Synthohol
                  Certified Konica Expert

                  Site Contributor
                  5,000+ Posts
                  • Mar 2016
                  • 5793
                  #5
                  Re: FS-533 First page of stapled set does not align with rest of sheets

                  Originally posted by blackcat4866
                  Does it look like this?:
                  EXACTLY like that
                  We know a thing or two because we've seen a thing or two.
                  The medication helps though...

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22997
                      #6
                      Re: FS-533 First page of stapled set does not align with rest of sheets

                      Originally posted by Synthohol
                      EXACTLY like that
                      Nope. Never seen it. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • JOHNR
                          Junior Member
                          • Jan 2021
                          • 9
                          #7
                          Re: FS-533 First page of stapled set does not align with rest of sheets

                          [QUOTE=EarthKmTech;538794]First time I've experienced this on one of these.

                          Guide number 7 on the stapler unit develops a nick in it from normal usage which catches only the fist sheet and stops it going all the way back into the stapler. All sheets after it go over the top of it to the back no problems.

                          Screen Shot 2016-11-04 at 3.17.36 pm.jpg

                          Good news is that it works without it just fine. Remove it and problem solved.

                          This is what the nick looks like:

                          I have the same problem,even when i am not using staple the first page does not align and has an angle about half the times.I thought maybe some glue from the packaging of the paper had stuck on the rollers so i cleaned them but with no result.From the pictures you posted i cannot understand where that guide is to remove it.Can it be seen externally?I must remove entirely the finisher to access it?Maybe a zoom out picture of where it is would help me.Thanks in advance

                            Comment

                            Previous template Next
                            Working...