Fused unit error

[Brett GS]

Re: Fused unit error

Before you do anything else,check your icp's on the printer control board.
In the past i have had a c253 that didnt want to reset the transfer belt and found a blown icp.

[allan]

Re: Fused unit error

Whawhawhahwa

[blackcat4866]

Re: Fused unit error

Darn! I missed out on a whole lot of confusion. I am so disappointed. =^..^=

[karim-tech]

Re: Fused unit error

hi

change the PRCB board i had the same prob with the transfert belt in diff machine ;

good luck

[copier tech]

Re: Fused unit error

hi

change the PRCB board i had the same prob with the transfert belt in diff machine ;

good luck

If the fuser units you replaced were brand new (never been put in another machine) then yes you have a failed PRCB board.

If however the units you replaced were used, then simply replace the fuse in the fuser as I mentioned above.