[Misc] Konica Minolta C280 Not Printing

[mearmi]

Konica Minolta C280 Doesn't Print. Data light flashes and disappears.

Changed the Ethernet cable.

Can send scan to email etc. Copy can be done as well.

Please advise

Thanks and Regards,

mearmi

[BR549]

Re: Konica Minolta C280 Not Printing

Is account tracking enabled on this machine? I believe that would be the symptom if account tracking is being used and you used a invalid account code. Or no code is entered in the driver. Or if they have limits, that account may have reached their limit.

[paulrid]

Re: Konica Minolta C280 Not Printing

Agree with BR549 also check print history and see what it says.

[blackcat4866]

Re: Konica Minolta C280 Not Printing

The simplest way to find out if you can print is to connect you laptop via crossover cable and install a driver. For testing purposes I've found that my Lexmark universal driver will send a valid print job to nearly any MFP. All I do is determine what the printers IP is, set my laptop to an IP (last octet +1), and add a port to my Lexie driver at the printer's IP. Within 5 minutes you should know if the MFP can or cannot print. =^..^=

[mearmi]

Re: Konica Minolta C280 Not Printing

Is account tracking enabled on this machine? I believe that would be the symptom if account tracking is being used and you used a invalid account code. Or no code is entered in the driver. Or if they have limits, that account may have reached their limit.

Thanks for your reply. No account tracking is enabled.

Regards,

[AjitN]

Re: Konica Minolta C280 Not Printing

Simple things first, if data light flashes & job gets deleted, try printing internal demo page.
If it prints well then your print processor is good.
if not you need to load firmware, I face this problem with C360.
Hope this helps

[MFPTech]

Re: Konica Minolta C280 Not Printing

Konica Minolta C280 Doesn't Print. Data light flashes and disappears.

Changed the Ethernet cable.

Can send scan to email etc. Copy can be done as well.

Please advise

Thanks and Regards,

mearmi

it looks like raw data is going to the machine? check job que from page scope. Conflict IP on the network? unplug the network cable and print directly from your laptop. crossover cable no longer needed, straight through cable is fine

Simple things first, if data light flashes & job gets deleted, try printing internal demo page.
If it prints well then your print processor is good.
if not you need to load firmware, I face this problem with C360.
Hope this helps

Sent from my SGH-I337M using Tapatalk

[musthafavi]

Re: Konica Minolta C280 Not Printing

it looks like raw data is going to the machine? check job que from page scope. Conflict IP on the network? unplug the network cable and print directly from your laptop. crossover cable no longer needed, straight through cable is fine



Sent from my SGH-I337M using Tapatalk

Me to also having the same problem with konica Minolta C360. Doesn't Print. Data light flashes

I can print demo page
Account tracking is OFF

Please help me how to solve this issue

[copier tech]

Re: Konica Minolta C280 Not Printing

Are they any messages on the screen? transfer belt etc maybe over life

[musthafavi]

Re: Konica Minolta C280 Not Printing

Are they any messages on the screen? transfer belt etc maybe over life

There was a message to change transfer belt unit, so i replaced with new one, after changing also warning message was popup, so I reset the value from service mod

Please see the attached consumable details

[copier tech]

Re: Konica Minolta C280 Not Printing

All consumables look fine.

If account track etc is definitely turned off try a clear all data in service mode.

[musthafavi]

Re: Konica Minolta C280 Not Printing

All consumables look fine.

If account track etc is definitely turned off try a clear all data in service mode.

Thanks for your support,

Could you please tell me where this Clear all data option located in service mode

[copier tech]

Re: Konica Minolta C280 Not Printing

Thanks for your support,

Could you please tell me where this Clear all data option located in service mode

From memory system2>Initilisation>data clear

[MFPTech]

Re: Konica Minolta C280 Not Printing

Reset the machine in SM - clesr all, setup network and fax, install movie data and MFPTech is your uncle

Sent from my SM-G900W8 using Tapatalk

[copier tech]

Re: Konica Minolta C280 Not Printing

Reset the machine in SM - clesr all, setup network and fax, install movie data and MFPTech is your uncle

Sent from my SM-G900W8 using Tapatalk

Where about in Surrey you from dude?