Konica Minolta C364 Scanner Adjustment Centering - Color Chart

[mearmi]

Getting problem with Side Edge Margins in Konica C364. From all the paper trays it is same.

For ADF we adjusted in Service Mode by going to Machine-Scan Area and Side Edge and it is fine.

But from the platen glass still getting less margin on the side.

Do we need to have Konica Minolta Color Chart. If someone can send us.

Thanks and Regards,

[Max]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

Check your trays. Make sure the side to side fences are centralized and not off set to one side. Once you get that in the right place for the off the glass copy then adjust the DF.

[mearmi]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

Check your trays. Make sure the side to side fences are centralized and not off set to one side. Once you get that in the right place for the off the glass copy then adjust the DF.

Fences are centralized.

Print is fine but copy from Platen glass is still same. Please find the attachment. Thanks

SWHC36417042916090.pdf

[Synthohol]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

is the long or short edge the lead edge?

[blackcat4866]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

Excuse me for saying so, but isn't you're image reduced 8% along the short edge and 3% along the long edge, if those arrows were touching the edge of an A4 original? Don't you thing you should address that first, before trying to move the image around? =^..^=

[mearmi]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

is the long or short edge the lead edge?

Leading Edge is fine.

It is Long Edge (Landscape).

Thanks

[Synthohol]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

long edge is portrait.
please clarify.

[allan]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

You have to do print area then do scan area. Do all the adjustments including the magnification adjustment.
You don't need a chart.

[mearmi]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

You have to do print area then do scan area. Do all the adjustments including the magnification adjustment.
You don't need a chart.

Thanks a lot

[Barry97]

Re: Konica Minolta C364 Scanner Adjustment Centering - Color Chart

Fences are centralized.

Print is fine but copy from Platen glass is still same. Please find the attachment. Thanks

[ATTACH]36509[/ATTACH]

This one is new to me. where do you get that print out.