C203 line issues

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4592
    #16
    Re: C203 line issues

    Good thought Hans. This may be the calm before the storm (gears chattering). If the trans belt cleaning unit was thoroughly vac'd out and put back into mach then you should be able to get several clean pages before lines would show up again? Another thought, if you go to vac out the trans belt cleaning unit and it's not packed with toner then does that mean the machines waste transport is working ok? I would think so.

      Comment

      • jeffreyclay
        Technician
        • Sep 2008
        • 43
        #17
        Re: C203 line issues

        May be a longshot but reminds me of ripple in the power supply (open filter capacitor). It's hard to imagine that all 4 channels of the copier have identical failures. The final fix should be pose some interesting discussion.

          Comment

          • t85ster
            Technician

            Site Contributor
            • Mar 2015
            • 39
            #18
            Re: C203 line issues

            Originally posted by paulrid
            Thanks for the reply blackcat,

            i have printed those those off but don't have them to attach but I could see the pattern for all colours, when I swapped IU's the pattern were identical. We may need to swap out machine but it's up a narrow staircase and I'm old with a bad back 😂

            Paul.

            Paul, I"m 64 with a bad back, I have to swap out a C754 w/Booklet Finisher & LCT up a narrow wooden staircase on Tuesday, can you give me an assist? Seriously, but lol.

              Comment

              • paulrid
                Trusted Tech

                100+ Posts
                • Nov 2011
                • 206
                #19
                Re: C203 line issues

                Sorry all for not replying I've been side tracked for a few days 😂

                I havent been been back to this yet so I'll try a few more things and let you know, probably just swap it out.

                  Comment

                  • paulrid
                    Trusted Tech

                    100+ Posts
                    • Nov 2011
                    • 206
                    #20
                    Re: C203 line issues

                    Originally posted by t85ster
                    Paul, I"m 64 with a bad back, I have to swap out a C754 w/Booklet Finisher & LCT up a narrow wooden staircase on Tuesday, can you give me an assist? Seriously, but lol.
                    by hand? That can't be done 😂 They weigh more than a small car lol
                    I would have said im busy that day 😂😂 but as its now Tuesday how did it go?

                      Comment

                      • t85ster
                        Technician

                        Site Contributor
                        • Mar 2015
                        • 39
                        #21
                        Re: C203 line issues

                        Originally posted by paulrid
                        by hand? That can't be done 😂 They weigh more than a small car lol
                        I would have said im busy that day 😂😂 but as its now Tuesday how did it go?
                        Paul, it went really well, me watching the four big moving company dudes carrying it up strapped to a refrigerator dolly.
                        It was well worth the $215.00 they charged!
                        Tom

                          Comment

                          Previous 1 2 template Next
                          Working...