C3110 lossing date & time

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copier tech
    Field Supervisor

    5,000+ Posts
    • Jan 2014
    • 7933
    #1

    [Electrical] C3110 lossing date & time

    Hi all,

    I have an issue where every time the machine is powered off/on it asks for the date & time to be entered. It doesn't loose any other settings just date & time.

    Looking at the parts manual cant see a back up battery?
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk
    ​
    Tags: date, entered, loose, settings, time
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22702
      #2
      Re: C3110 lossing date & time

      AFAIK that completely normal. It goes right into installation wizard at power ON. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Brett GS
          Trusted Tech

          100+ Posts
          • Jun 2013
          • 154
          #3
          Re: C3110 lossing date & time

          Was busy on one today,there is a backup battery.
          Try a battery from a B42/B36 should solve issue out.

            Comment

            Previous template Next
            Working...