47 results in 0.0212 seconds.
-
Fuser loose bushes anyone tried Kapton tape?
Probably everyone on here has replaced fusers with good old 6770 6600 errors because the foam bushes degrade and can't be replaced... had one today I... -
Ricoh bk5010
Does anyone know how to adjust the blade on these?
Was trimming well but has started to trim only half the booklet, blade has only done less... -
Kyocera 306ci,406ci -- Request
Does anyone have a machine available to check the belt tension on the right side door (operator side) responsible for duplex drive?. (They're visible... -
Color Registration Issue (ONLY in one CORNER) C2070
What should I chase...
machine was cleaned well, still doing it. Only rollers we did not get to was registration roller, but I don't see... -
Booklet Finisher SD-534 paper jam at saddle stitcher
Hi,
after working fine for months no paper passes the saddle stitcher; it curls there. Jam location: 36, no jam code displayed.
I attached... -
MP7502 LCT not finishing the supply
THe LCT Drawer on this 7502 has stopped running the peper all the way out, it starts jamming at about a quarter inch left to go, we refill it, then it... -
Sharp developer MX-61GVCA
Due to the many problems with the cyan developer, we are eagerly looking for loose cyan developer MX61GVCA. Sharp has a number for it, but you can only... -
C3110 lossing date & time
Hi all,
I have an issue where every time the machine is powered off/on it asks for the date & time to be entered. It doesn't loose any... -
Sharp MX-M620 developer on the loose
Have a customer with a Sharp MX-M620 with 1.8 million prints. Lately it's had an issue with spreading developer in odd places . I find a lot of it in... -
IPF-8300 Belt Tension?
Is there an adjustment for the belt tension?
Seems loose to me... -
GR3750 Transfer belts stop at speed 3+
We had this problem before but my then manager managed to fix it somehow but it had a new problem afterwards (loose connection) and wasn't used for years.... -
Ricoh C651Ex
Looking for help with a J054 jam. The paper goes through paper feed and just sits in the vertical paper path. It's not crumpled or jammed just sitting... -
Km 3060 looses screen alignment
We have a KM 3060 that intermittently loose its control panel screen alignment; thoughts? -
KM5030 Print board DIMM KP-893-A and KP-893-B what is the difference?
I have 2 print boards for KM5030, one is showing c0420 when DIMM KP-893-A was installed. I am a bit scared to put the other KP-893-B which is functional... -
PRO 1107EX
Hello,
I have a problem with a PRO 1107EX. When I
stapled a packet of foil, the leaves are not
align correctment! The...
